Overview
The Rugged Ridge 11229.02 is a non-locking black painted steel hatch cover, part number 11229.02. It fits directly over the existing gas cap opening and is a Direct Fit part for 2 and 4-door models.
The cover attaches to the original plastic insert with self tapping screws, and some drilling is required. The finish is a black powder coat.
Key features
- Fits directly over the existing gas cap opening
- Black painted steel construction
- Non-locking
- Attaches to the OE plastic insert with self tapping screws
- Some drilling required
Drilling and fastener care
A hatch cover over the filler opening protects the area from dust, road spray and weather, and it changes how the opening looks from outside. Because this cover is fastened into an existing plastic insert, the fasteners carry the load of the whole part. Steel resists dents better than plastic, but paint on steel can chip, so inspect the edges around the holes for rust after a season of use.
Drilling is the step that takes the most care. Measure twice, mark the holes with the cover held in place, and start with a smaller pilot hole where the material is thin. Keep the vehicle clear of open flame and clean away every chip before reinstalling trim. Retighten the screws after the first few trips, since vibration can loosen them.
- Mark hole positions before drilling
- Deburr holes and remove all metal shavings
- Recheck screw tightness after the first few drives
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11229.02 |
| UPC | 804314159948 |
| Material | Painted steel |
| Finish | Black powder coat |
| Locking | No |
| Attachment | Self tapping screws into the OE plastic insert |
| Body style | 2 and 4-door models |
| Fitment type | Direct Fit |
Vehicle fitment
The 11229.02 is a Direct Fit part for 2 and 4-door models. Fit should be checked against the gas cap opening on your vehicle.
Compare the cover with your own gas cap opening before drilling. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some drilling is required, so check placement against the existing opening before drilling. The cover is fastened with self tapping screws into the original plastic insert. Keep metal shavings out of the fuel filler area.
What’s included
Confirm whether self tapping screws come with the cover before starting the installation.
















