Overview
The ARB 3552040 is a front fitting kit for the 2006–2009 Dodge Ram 2500 and Ram 3500. It contains the hardware that connects an ARB bull bar bumper to the truck’s frame, and the kit is built for these two Ram series rather than for general use.
ARB 4×4 Accessories designed the kit to work with the Ram’s air bag deployment and other safety systems. The mounting hardware is matched to these trucks, so it should not be swapped for parts from another model.
Key features
- Direct-fit hardware for 2006–2009 Ram 2500 and 3500 trucks
- Mounts an ARB bull bar bumper at the front of the chassis
- Designed around the truck’s air bag deployment and other safety systems
- Includes the full set of bumper mounting hardware
Finish and long-term care
The grey powdercoat finish on the bumper protects mounting surfaces from road salt and moisture, but chips and scratches from stones or brush can still expose bare metal. Touching up small chips with a matching paint or primer as soon as they appear helps prevent corrosion from spreading under the coating. Bolted joints also benefit from a light coat of anti-seize on the threads to make future removal easier.
Heavy-duty trucks put more stress on front-end hardware than lighter pickups, so inspection should be routine rather than occasional. Look at the brackets where they meet the frame, the spacer hardware and any rubber bushings for cracking or flattening. If the bar has been struck or the truck has been used off road for a long time, check the chassis-side mounts closely before the next trip.
- Touch up chips before rust starts
- Inspect frame brackets after hard use
- Replace worn bushings with the matching part
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3552040 |
| UPC | 881348007834 |
| Location | Front |
| Position | Front |
| Fitment type | Direct fit |
| Matching bumper finish | Grey powdercoat |
Vehicle fitment
Fits the 2006–2009 Dodge Ram 2500 and the 2006–2009 Dodge Ram 3500. Both are direct-fit applications for these model years.
Other Ram generations and model years are not covered, including the 1500 series. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit ties into the chassis and the air bag deployment system, the mounting points must match the 2006–2009 Ram 2500 or 3500 exactly. Fit only the hardware supplied with this kit.
What’s included
All hardware needed to mount an ARB bull bar bumper to the Ram chassis.
Not included: the ARB bumper itself.









