Overview
The Rigid Industries Fog Light Brackets, part number 40235, are replacement fog light mounts for the Ford F-150 SVT Raptor. They allow two Rigid D-Series LED lights in each fog light opening in the lower front bumper for an OE-quality look. The kit fits the 2010–2014 Ford F-150 (SVT Raptor).
Rigid also offers cradle mounts, tube mounts, tab mounts and windshield mounts for other lighting setups. This bracket kit is the bumper-mount option for the Raptor’s fog light openings. The D-Series LED lights are not included and must be added separately.
Key features
- Replacement fog light kit designed for the F-150 SVT Raptor
- Holds two D-Series LED lights in each fog light opening
- Laser-cut 304 stainless steel construction
- Black powder-coat finish
- Includes a wire harness extension and all necessary hardware
- Covered by Rigid Industries’ limited lifetime warranty
Bumper lighting and wiring
Mounting lights in the lower bumper puts them close to the ground, where they take spray, gravel and brush contact. Bumper-mounted lights benefit from a snug, vibration-free bracket and from lights that seal well against water. Aim the lights after installation and recheck the aim after rough driving, since bumper flex can shift the angle slightly.
The wiring carries the most load on this type of setup, so route it with slack and keep connectors above the splash zone. A fused relay protects the harness if the lights draw more current than expected. Inspect the wiring at each service for chafing where it passes through the bumper opening.
- Route harness slack away from the bumper edge
- Use a fused relay for the lights
- Recheck aim after rough driving
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40235 |
| UPC | 815711010053 |
| Material | 304 stainless steel, laser-cut |
| Finish | Black powder-coat |
| Color | Black |
| Mounting type | Bumper mount |
| Lights per fog light opening | Two D-Series LED lights (not included) |
| Warranty | Limited lifetime |
Vehicle fitment
It mounts in the fog light openings of the lower front bumper on the 2010–2014 Ford F-150 SVT Raptor.
Standard F-150 trims and model years after 2014 fall outside this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the lights through the included harness extension and a fused relay. Check local rules on fog light use before driving on public roads.
What’s included
The kit includes a wire harness extension and all necessary hardware.
Not included: the D-Series LED lights, two per fog light opening.









