Overview
The Rigid Industries Chase Tail Light in blue (part number RIG90144) is a rear-facing LED light that combines reverse, courtesy, strobe, running and brake lights in one aluminum housing. It is a universal fit design, not built for a specific vehicle model, and suits UTVs, rail, buggies, Jeeps and other off-road applications.
A halo of colored LEDs around the perimeter can be red, amber or blue, and this part is the blue version. The halo can run as a strobe for racing and chase applications, as a running light or as a third brake light. The center is a 715 lumen white light for reverse or area lighting, and a smaller downward-facing courtesy light illuminates the cargo area.
Key features
- Combined reverse, courtesy, strobe, running and brake lights
- Halo of colored LEDs in red, amber or blue on an aluminum housing
- Strobe use for racing and chase applications
- 715 lumen white center light for reverse or area lighting
- Downward-facing courtesy light for the cargo area
- Can be used on its own or wired in series
Choosing and wiring off-road lights
Rear lights on off-road vehicles take more abuse than most, since mud, rock spray and vibration reach the housing on every trip. A multi-function light like this one combines reverse, running, brake and strobe duties, so the wiring has to handle each function properly before use. Plan the circuit so the brake and running functions stay independent of the strobe, and keep the ground connection short and clean.
Look at the setup as a whole. If the light is used for racing or chase lighting, confirm that its flashing and colored functions suit where you drive. Relays and fuses matter more when several functions share one feed, and a worn connector can cause flicker or intermittent operation. Inspect the wiring and housing seals after each heavy trail session to catch problems early.
- Route wiring away from moving suspension parts
- Use dielectric grease on connectors
- Check the lens and seal after rock impacts
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | RIG90144 |
| Color (title) | Blue |
| Halo colors | Red, amber or blue |
| Housing | Aluminum |
| Center light output | 715 lumen white |
| Courtesy light | Smaller, downward-facing |
| Light type | LED |
| Fitment type | Universal fit |
Vehicle fitment
The Chase light is not vehicle-specific and works as a universal fit part for UTVs, rail, buggies, Jeeps and other off-road applications. Mounting space varies by vehicle, so measure it before choosing the Chase light.
Installation notes
It can be used on its own or wired in series, so plan the wiring for your setup. Wire it through a fused circuit, and check local rules before using strobe or colored lighting on public roads.
What’s included
Confirm the included accessories and mounting hardware before ordering.












