Select your vehicle

Rhino-Rack Roof Rack Alloy Roller (470mm/18″) – RR470

Rhino-Rack USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Compact 470 mm (18 inch) alloy roller for ladders
  • Attaches to a Rhino-Rack Heavy Duty bar
  • Heavy duty alloy with a black plastic cover
  • Includes two roller bushes and brackets

Description

Overview

The Rhino-Rack Roof Rack Alloy Roller (RR470) is a 470 mm (18 inch) roller that lets a ladder be rolled on and off a Rhino-Rack Heavy Duty roof rack bar. It attaches to the bar with brackets, and the ladder is then rolled onto the rack by hand with little effort. It loads a ladder without needing a full ladder rack system. The RR470 is a universal accessory, matched to the Heavy Duty bar rather than to a vehicle.

Key features

  • Heavy duty alloy roller, 470 mm (18 inch) long
  • Black plastic cover
  • Roller bushes and brackets included for the Heavy Duty bar
  • Works without a full ladder rack system

Before you buy

Check the bar before anything else. The roller clamps to a Heavy Duty bar with its brackets, so a ladder can only be rolled on where that bar sits on the roof. Ladder weight and length matter too, because a longer ladder puts more leverage on the roller and bar as it is pushed on. Setting the ladder down squarely and keeping it level as it rolls makes loading easier.

Most owners fit the roller once and leave it in place, so inspection matters more than setup. Look over the bushes and brackets for wear, cracks or looseness before each trip, and re-tighten fixings after the first few runs. Keep the black cover on when the roller is not in use to protect the alloy from grit and moisture.

Specifications

Brand Rhino-Rack USA
Part number RHORR470
Length 470 mm (18 inches)
Material Heavy duty alloy
Cover Black plastic
Included Roller bushes and brackets
Compatible bar Rhino-Rack Heavy Duty roof rack bar

Vehicle fitment

The alloy roller is not tied to a vehicle model. It is designed to attach to a Rhino-Rack Heavy Duty bar, so the bar is the fitting point to check before ordering.

Installation notes

Attach the roller to the bar using the brackets and roller bushes supplied. Then roll the ladder onto the bar.

What’s included

The alloy roller with its black plastic cover, a pair of roller bushes and brackets for the Heavy Duty bar.

SKU: RHORR470 Categories: , ,

Questions & Answers

Does the RR470 fit a Rhino-Rack Heavy Duty bar?

Yes. The roller comes with brackets and roller bushes that attach it to a Rhino-Rack Heavy Duty bar. Check the bar type before ordering, since the roller is designed for that bar.

How long is the RR470 roller?

The RR470 measures 470 mm, which is 18 inches, in length. Its compact size is what Rhino-Rack describes as suited to rolling a ladder onto the bar.

Do I need a full ladder rack to use the RR470?

No. The roller works without a full ladder rack system, because the ladder is rolled onto the bar by hand.

How do I know when the roller bushes need replacing?

Look for flat spots, cracking or a loose fit on the ladder rails when rolling. A bush that feels sloppy or lets the ladder wobble should be replaced. Check them periodically and keep spare roller bushes ready if the ladder is used often.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon