Overview
The Retrax RetraxPRO MX retractable tonneau cover, part number RET80471, is a hard bed cover with a textured matte black powder coat, made for the 2014–2018 Chevrolet Silverado 1500 and 2014–2018 GMC Sierra 1500 pickups.
A retractable tonneau cover rolls up into a compact storage container at the front of the bed instead of folding or bunching like a soft cover. This model uses heavy-duty aluminum slats in a matte powder finish that supports distributed loads of more than 500 pounds. The cover latches or key locks at any stopping point, so you can open only part of the bed for a longer item.
Key features
- Heavy-duty aluminum slats with a textured matte black powder coat finish
- Sealed ball-bearing rollers on each section, so one hand can open and close the cover
- Operates without pull straps, Velcro, snaps or springs
- Low-profile design stays flush with the rails when the cover is closed
- Dual Latch Locking System; the cover latches or key locks in any position
- Limited lifetime warranty from Retrax
Working with a roll-up cover
A retractable cover’s storage container sits at the front of the bed, so the space in front of the cab matters. Confirm that the container and rollers clear the cab and tailgate through full travel, and keep loads from pressing against the cover while it moves. Latching the cover partway open is useful for long items, but check that the latch engages fully before driving.
Keep the rollers working smoothly by wiping grit from the rails and checking for debris in the storage housing. Dust and sand can wear bearings if they are left to build up. Inspect the slats for dents and the powder coat for chips, and touch up small chips before rust starts. Regular checks help a heavy-duty cover stay quiet and easy to operate.
Specifications
| Brand | Retrax |
|---|---|
| Part number | RET80471 |
| Product line | RetraxPRO MX |
| Cover type | Retractable |
| Slat material | Heavy-duty aluminum |
| Finish | Textured matte black powder coat |
| Load support | Distributed loads of more than 500 pounds |
| Locking | Dual Latch Locking System; latches or key locks in any position |
| Warranty | Limited lifetime |
Vehicle fitment
It fits these trims of the 2014–2018 Chevrolet Silverado 1500 and 2014–2018 GMC Sierra 1500:
- 2014–2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT)
- 2014–2018 GMC Sierra 1500 (Base, Denali, SLE, SLT)
Silverado 2500 HD and 3500 HD, Sierra 2500 HD and 3500 HD, and model years outside 2014–2018 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cover mounts to the bed rails, so check that your bed rail layout matches a 2014–2018 1500 bed before you start. Once mounted, run the cover through its full travel and confirm that the rollers and the storage container clear the cab and tailgate.
What’s included
Check the package contents against your installation before mounting, including the rollers and storage container.









