Overview
The Retrax RetraxONE retractable tonneau cover, part number RET10462, is a one-piece polycarbonate bed cover. It fits 2014 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, and 2015 to 2019 Silverado and Sierra 2500 HD and 3500 HD trucks. It is a low-profile cover that rolls back into a compact canister at the front of the bed, so it stays clear of the cargo area.
The rigid polycarbonate sheet has no joints or hinges, so there are no seams that trap dust or wear. Sealed ball-bearing rollers on aluminum support beams carry the sheet, and no springs are used. The front cover sits flush with the bed cover, creating a firm seal that helps keep the bed dry.
Key features
- One-piece polycarbonate sheet with no joints or hinges
- Low-profile design with a front cover flush to the bed cover
- Sealed ball-bearing rollers mounted on aluminum support beams
- Spiral track system keeps the sheet from touching itself while opening or closing
- Tempered aluminum support beams embedded in the sheet, which Retrax says add strength for heavy snow loads
- The rigid design improves aerodynamics, which can improve fuel economy by as much as 10%.
Maintaining a roll-up polycarbonate cover
A roll-up polycarbonate cover has few moving parts, but each one matters. The spiral track, sealed rollers and support beams carry the sheet through every opening and closing cycle. Keep the track clear of grit and check that the sheet slides evenly, since uneven travel can point to debris or a misaligned roller.
Snow and ice can build up along the front edge and seal. Clear it gently with a soft brush rather than a metal scraper, which can mark the polycarbonate. Wash the sealing edges periodically to remove road salt, and inspect the front cover for gaps that could let water into the bed.
- Clear the spiral track of grit
- Brush off snow with a soft tool
- Inspect the front seal for gaps
Specifications
| Brand | Retrax |
|---|---|
| Part number | RET10462 |
| Product line | RetraxONE retractable tonneau cover |
| Cover material | Polycarbonate sheet, one piece (commonly known as Lexan) |
| Support beams | Tempered aluminum |
| Roller type | Sealed ball-bearing |
| Storage canister size | Approximately 11 inches square |
| Temperature range | -50 to +200 F |
Vehicle fitment
It fits 2014 to 2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT); 2015 to 2019 Chevrolet Silverado 2500 HD and 3500 HD (High Country, LT, LTZ, WT); 2014 to 2018 GMC Sierra 1500 (Base, Denali, SLE, SLT); and 2015 to 2019 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT).
The list does not cover Silverado or Sierra model years before 2014 or after 2019, and it does not include the Chevrolet Colorado or GMC Canyon. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the package contents against your installation before starting, including the mounting parts.









