Overview
The Rampage 98499 is a black powder-coated windshield header channel for the 1966-1977 Ford Bronco. It fits the 1975-1977 Ford Bronco Sport as well, as a direct fit that requires no drilling.
The channel is a header part for the top of the windshield frame. It is designed to stay secure when the vehicle takes jolts.
It is a direct fit with no drilling. Compare the channel with your original part before installing to confirm the match.
Key features
- Black powder-coated finish
- Windshield header channel
- Drilling is not required
- Designed to stay secure against jolts
- Direct fit
- Listed fitment for early Ford Bronco models
Pre-install checks
A windshield header channel sits at the top of the glass frame, where it holds the upper edge of the windshield and helps the frame keep its shape. On older Broncos, that edge often shows rust, so the mounting surface deserves attention before any new part goes on. Surface rust, bent flanges and loose spot welds should be dealt with first, since a new channel cannot make up for a weak frame.
Most owners who replace a header channel also replace the sealing strips and hardware, because old fasteners can corrode and make a fresh install harder to tighten evenly. Work slowly and keep track of which fastener came from which location. If the frame shows cracks or distortion beyond surface rust, a body shop can assess the structure before work continues.
- Inspect the mounting surfaces for rust before fitting
- Replace corroded fasteners at the same time
- Mark fastener locations as you remove them
Specifications
| Brand | Rampage |
|---|---|
| Part number | 98499 |
| UPC | 873563006716 |
| Product type | Windshield header channel |
| Finish | Black powder coat |
| Drilling required | No |
| Fit type | Direct fit |
| Manufacturer part number listed | RPP98499 |
Vehicle fitment
The stored manufacturer fitment list for the Rampage 98499 covers the 1966-1977 Ford Bronco in Base, Custom, Northland, Ranger, Roadster and Wagon trims, and the 1975-1977 Ford Bronco Sport.
The list covers 1966-1977 only. Broncos from 1978 and later, and the later Bronco Sport models, are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use mounting hardware that matches your original header part. Tighten all fasteners to the level the original part used, and re-check them after the first few miles of driving.
If a step involves cutting, drilling or removing factory parts, work carefully and consider professional installation.
The windshield frame is a structural and safety component, so take care when removing and refitting any part of it. Check for rust or damage on the mounting surfaces first.
Before installing, compare the part number on the package with 98499 and check that all parts are present. Work on level ground and wear eye protection.
Take photographs of the existing header and its fasteners before removal, so that you can refit the new channel in the same position.
What’s included
The windshield header channel is the only item included. Check that you have the mounting hardware your installation requires.
Not included: Hardware and seals are not included.









