Overview
The Rigid Industries Protective Polycarbonate Cover is a lens cover for Rigid Industries lights, made to protect the light while leaving its output unchanged. It is sold in 10 in. sections that can be cut to 4 in. or 6 in. covers, so one length can be sized to the light. It is made from optical grade polycarbonate and is available in transparent amber, blue, red and clear.
The cover is made for E-Series, M-Series and Dually/D2 lights. The polycarbonate is tough and snaps easily into place, and it does not impede light output. It is not tied to a specific vehicle.
Key features
- Optical grade polycarbonate, custom molded for visually clear light covers
- Sold in 10 in. sections, easily cut to 4 in. or 6 in. covers
- Available in transparent amber, blue, red and clear
- Snaps easily into place and is tough enough to protect the light
- Black and white covers have a traditional round logo; tinted covers have text along the bottom
- Does not impede light output
Lens covers and light output
A protective lens cover is a thin shield between the lens and the road. Its job is to take abrasion from grit, washing and trail debris so the lens itself stays clean and clear. Covers add a small amount of material in front of the light, so cleanliness matters: a dusty cover can cut output more than the cover material does.
Before cutting a section to length, mark the cut line on the cover and dry-fit it on the light. Keep the edges smooth after cutting so they do not catch debris. Re-check the seating after rough use, since vibration can loosen a snap fit over time.
- Clean the cover before checking output
- Look for cracks near the snap edges
- Dry-fit the cut section before final trimming
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774026720 |
| Material | Optical grade polycarbonate plastic |
| Section length | 10 in. increments |
| Cut to | 4 in. or 6 in. covers |
| Colors | Transparent amber, blue, red, clear |
| Logo | Round logo on black and white covers; text along bottom on tinted covers |
| Light lines | E-Series, M-Series, Dually/D2 |
Vehicle fitment
It is not vehicle-specific and is a universal fit for E-Series, M-Series and Dually/D2 light lines.
It is sized to the light rather than the vehicle, so cut the section to the size the light needs before installing. Confirm your light model before ordering.
Installation notes
Cut the 10 in. section to the 4 in. or 6 in. size needed, then snap the polycarbonate into place over the light.
What’s included
The cover is sold in 10 in. sections. Check the package contents against your installation before starting.
Not included: the Rigid Industries light that the cover protects.









