Overview
The Pro Comp Suspension 69261 is a red, non-greaseable polyurethane leaf spring bushing for Pro Comp springs only.
It is made for Pro Comp springs only. Confirm fit for the spring you are replacing before ordering.
Installing leaf spring bushings safely
Leaf spring work loads the frame and axle in ways that a jack cannot hold safely, so set the vehicle on stands before loosening any spring hardware. Pressing a new bushing into a spring eye usually calls for a press or a proper installation tool, because forcing it with a hammer can split the bushing or damage the sleeve. Lubricate only where the instructions allow, and keep grit away from the new bore.
Once the spring is back together, check that the shackle and hanger move freely and that no part rubs on the tire or brake line through full travel. Recheck the hardware after the first drives, since settling is normal in new rubber and polyurethane. If a new bushing still squeaks or knocks, look for a worn shackle, loose mounts or a cracked spring before assuming the bushing is at fault.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 69261 |
| UPC | 614901692617 |
| Product type | Leaf spring bushing |
| Material | Polyurethane |
| Color | Red |
| Service | Non-greaseable |
| For use with | Pro Comp springs only |
Vehicle fitment
It is made for Pro Comp springs only. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Professional installation is recommended for suspension work, since it affects steering, braking and handling. Support the vehicle on jack stands rather than a jack alone, torque every fastener to its specified value, and re-check the torque after the first miles of driving. Have the alignment checked after any suspension work, and check local regulations on vehicle height and equipment.








