Overview
The Pro Comp Leaf Spring Bushing in red, part number 69251, is a polyurethane replacement bushing for Pro Comp leaf springs. Pro Comp says its replacement kits make it easy to swap out damaged or worn bushings.
Key features
- Polyurethane bushing for replacing worn or damaged leaf spring bushings
- Non-greaseable service, so there is no grease fitting to maintain
- Red finish
Replacing worn spring bushings
A leaf spring bushing carries the movement at the spring eye, so wear there shows up as clunks, a loose steering feel or uneven tire wear over time. Changing it early keeps the spring locating the axle as designed.
Because this is a universal fit part for Pro Comp leaf springs, the most useful check is the spring itself. Measure the eye and confirm the bushing size and style before pressing anything in, since the wrong bushing can sit loose or bind.
When pressing a bushing in, use a press or pulling tool and keep the bushing square to the eye. Tighten the spring hardware only with the vehicle back on its wheels, so the bushing is not twisted while it settles into place.
- Inspect the spring eye for cracks or distortion
- Replace hangers and hardware that show wear
- Check spring alignment after the swap
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 69251 |
| UPC | 614901691528 |
| Material | Polyurethane |
| Color | Red |
| Service | Non-greaseable |
| Fitment | Universal fit for Pro Comp leaf springs |
Vehicle fitment
It is a universal fit for Pro Comp leaf springs rather than a vehicle-specific part.
Confirm the bushing matches the spring you are replacing before ordering.
What’s included
This is a replacement kit. Check the package contents against your installation before starting.











