Overview
The Power Stop K138 is a front and rear Z23 Evolution Sport performance brake upgrade kit for the 2003–2009 Toyota 4Runner and the 2007–2009 Toyota FJ Cruiser. It carries drilled and slotted rotors and carbon fiber infused ceramic pads for both axles.
The K138 is a front and rear Z23 Evolution kit with drilled and slotted rotors and carbon fiber infused ceramic pads for both axles. Rotors use Tru-Cast construction, are silver zinc plated and are coated. Brake lines are not included. The 4Runner and FJ Cruiser share a platform, which is why one kit covers both. The 4Runner years run longer than the FJ Cruiser years, so check the model year first. Drilled holes and slots help clear gas, water and dust from the friction face.
Key features
- Both axles are covered in one kit.
- Evolution drilled and slotted performance rotors.
- The K138 uses Z23 Evolution Sport carbon fiber infused ceramic pads.
- Premium hardware, pin bushing kit and Hi-Temp lubricant.
- Slots improve air circulation and pad bite.
- Rotors are silver zinc plated.
- It fits the 4Runner and the FJ Cruiser.
Sharing one kit across models
Trucks and SUVs built on a shared platform often use the same brake hardware, which is why one kit can cover more than one model. Years and trims still differ, so the vehicle’s exact specification should be checked before buying. Both axles on a body-on-frame vehicle see heavy use from towing, gravel roads and loaded cargo, so the front and rear pads may wear at different rates.
Inspection is best done on both axles at once. Check pad thickness, rotor surfaces and the caliper slide pins, and clean away dust and mud from the backing plates. Listen for squealing or pulsing, which can point to uneven rotor contact. Sticking caliper pins are a common cause of one-sided wear, so lubricate them with the supplied lubricant when the calipers are apart.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K138 |
| UPC | 792088525604 |
| Product type | Performance brake upgrade kit |
| Series | Z23 Evolution Sport |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z23 Evolution Sport carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing kit and Hi-Temp lubricant |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims, and the 2007–2009 Toyota FJ Cruiser.
- 2003–2009 Toyota 4Runner (Limited, SR5, Sport)
- 2007–2009 Toyota FJ Cruiser (Base, TRD Special Edition, Trail Teams Special Edition)
The 4Runner fits only 2003–2009 and the FJ Cruiser only 2007–2009. Check your vehicle’s year, model and trim before buying.
Installation notes
The K138 is a front and rear kit, so set aside time for both axles. Hardware, a pin bushing kit and Hi-Temp lubricant are included with the rotors and pads.
What’s included
Evolution drilled and slotted rotors, Z23 Evolution Sport ceramic pads, premium hardware, a pin bushing kit and Hi-Temp lubricant for the front and rear axles.
Not included: Brake lines.









