Overview
The POP N lock Power Tailgate Lock PL8547TUN is a power tailgate lock for the 2014–2021 Toyota Tundra. It locks the tailgate when the power doors lock and mounts inside the tailgate, hidden from view. A Plug and Play T-Harness is supplied for a simpler connection to the truck’s wiring.
BOLT codeable technology lets you use your own ignition key. Insert the key into the lock and it memorizes the key code. Upgrading from the PL5300 requires a camera holder step, covered in the installation notes.
Key features
- Locks the tailgate automatically when the power doors are locked
- BOLT codeable technology memorizes your own ignition key code
- Plug and Play T-Harness plugs directly into the OEM wire harness
- Loomed wires with heat-resistant fabric tape
- OEM-style connectors reduce the number of wire-to-wire connections
- Mounts inside the tailgate, hidden from view
Connecting to the factory harness
A T-harness is meant to connect the accessory wiring to the truck’s existing harness without cutting factory wires. Good connections depend on matching the connector style and keeping the wire routing clear of hinges, moving parts and sharp edges. Take the time to route the cable before fastening it, since a rubbing wire can fail over time.
Camera equipment is worth reviewing as part of the same project. When a truck has no factory camera holder, a separate mounting clip is needed, and that changes where wires run near the tailgate. After installation, test the lock with the power door locks and check that the wiring stays out of the way when the tailgate opens and closes.
- Match connector style before plugging in
- Route wires clear of the tailgate hinge
- Test lock action after the harness is connected
- Confirm camera holder needs before installing
Specifications
| Brand | POP N lock |
|---|---|
| Part number | POPPL8547TUN |
| Product type | Power tailgate lock |
| Key system | BOLT codeable, uses your own ignition key |
| Harness | Plug and Play T-Harness |
| Wire protection | Loomed wires with heat-resistant fabric tape |
| Connectors | OEM style |
| Camera holder | Factory camera holder required, or camera mounting clip purchased separately |
Vehicle fitment
It fits the 2014–2021 Toyota Tundra in the 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims.
Other Toyota trucks and Tundra years outside this range are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the Plug and Play T-Harness to the factory wire harness, where the OEM-style connectors reduce wire-to-wire splices. When upgrading from the PL5300, a factory camera holder is needed, or the camera mounting clip must be bought separately.
What’s included
The Plug and Play T-Harness is included.
Not included: The camera mounting clip, which is required when the truck has no factory camera holder.









