Overview
The Omix-ADA DMC-685459 is a steel replacement tailgate for the 1969-1983 Jeep CJ5, with JEEP stamped in the middle. It is an aftermarket tailgate, not OEM, finished in black primer only.
The primer coat means the tailgate needs finish paint, and additional preparation is required before painting. Omix-ADA says replacement steel body parts are sold AS IS, that minor imperfections or damage can occur in transit, and that professional installation is recommended.
Key features
- Steel tailgate
- JEEP stamped in the middle
- Black primer coating only
- Aftermarket part, not OEM
- Needs finish paint
- Professional installation recommended
Before painting the tailgate
A tailgate takes repeated stress from the spare tire, cargo and weather, so its seams, corners and lower edge see more wear than most body panels. On older CJ bodies, rust tends to start at the bottom edge, around the latch and where the hinges bolt to the body. Inspect the old tailgate and its mounting points before removing it, and note how the hinges and latch sit so the new panel can be set up the same way.
Because this panel arrives in black primer, the paint system does most of the protective work. Primer alone will not hold up to road salt and moisture for long, so a full automotive paint system over properly prepared metal is the usual approach. Sand any shipping marks, clean off oil, and fit the tailgate before painting so gaps can be adjusted while the surface is still bare.
- Check the panel for dents, creases or cracks before fitting
- Test latch alignment and hinge movement against the body
- Plan body prep and paint as one job
- Replace worn hinge bushings or bolts while the tailgate is off
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | DMC-685459 |
| UPC | 804314070151 |
| Product type | Replacement tailgate |
| Material | Steel |
| Finish | Black primer coating only (needs finish paint) |
| Marking | JEEP stamped in the middle |
| Origin type | Aftermarket, not OEM |
| Fit type | Direct fit |
| Manufacturer part code | OAIDMC-685459 |
Vehicle fitment
The Omix-ADA DMC-685459 fits the 1969–1983 Jeep CJ5, in Base, Golden Eagle, Laredo, Limited and Renegade trims.
It is an aftermarket steel replacement tailgate, not OEM. Confirm fit for your vehicle’s year, model and trim before ordering, and compare hinges and latch with your existing tailgate.
It fits the 1969–1983 CJ5 only, not the CJ7, Scrambler or Wrangler models.
Installation notes
Check the tailgate for imperfections on arrival, and prepare the surface as needed before painting. Professional installation is recommended by Omix-ADA. Remove and keep the old tailgate hardware, check that the hinge points and latch line up before painting, and apply a proper automotive paint system over the primer to protect the steel from rust. Hang the tailgate on its hinges before painting and check the gaps against the body, so any adjustment is made before the finish is applied.
What’s included
- Steel tailgate with JEEP stamped in the middle (black primer)
Not included: Finish paint. Check your existing hinges and hardware before installation.









