Overview
The Omix-Ada 18284.03 is a spring bushing for the front or rear spring at the shackle, fitting the 1978 to 1990 Jeep Wagoneer SJ. It measures 1-1/2 inch outside diameter by 2-15/16 inch and 2-7/8 inch long.
It is a direct OE replacement built to original specifications, backed by a limited five year warranty.
Key features
- Front or rear spring at the shackle location
- 1-1/2 inch outside diameter
- Lengths of 2-15/16 inch and 2-7/8 inch listed
- Covered by a limited five year warranty
- Omix-Ada part number 18284.03
Spring bushing wear signs
A spring bushing sits at the shackle and lets the spring flex while holding its position. When it wears, the spring can shift, the axle can move more than intended, and the vehicle may rattle or feel loose over bumps. Worn bushings often show up as a clunk when crossing uneven ground.
Inspect bushings whenever the spring hardware is off for other work. Look for cracks, flattened sections, or the bushing pulling out of the eye. Replace worn bushings in pairs on the same side, so the spring stays level and the wear does not transfer to the new part quickly.
- Check the shackle bolts for looseness
- Look for gaps between the bushing and the shackle
- Inspect the opposite side for matching wear
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18284.03 |
| UPC | 804314033934 |
| Position | Front or rear spring at shackle |
| Type | Spring bushing |
| Outside diameter | 1-1/2 inch |
| Length | 2-15/16 inch and 2-7/8 inch |
| Warranty | Limited five year warranty |
Vehicle fitment
It fits the 1978 to 1990 Jeep Wagoneer (SJ) Base, Brougham and Limited trims.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for Jeep models outside 1978 to 1990.
What’s included
Check the bushing count and any hardware against your installation before starting.








