Overview
The Omix-ADA amber side marker light, part number 12401.08, is the passenger side unit. It works only with a 2-lug type wire connector, so confirm the existing connector and inspect the original lens before fitting it. Confirm the vehicle year, model and chassis before ordering.
Key features
- Amber lens
- Passenger side position
- Side marker light
- Works only with a 2-lug type wire connector
Side marker light connectors
Side marker lights are small, but they depend on a clean electrical connection. A connector carries power to the lamp, so corrosion or a bent pin can cause dim or dead output. Before fitting, look at the plug and the terminals, and make sure the seal is intact so water does not reach the contacts.
Many side marker lights are replaced along with the lens, since an old lens that has faded can reduce visibility even when the bulb works. Check the lens surface and the mounting screws, and tighten them evenly so the lens seals against the body. Test the light with the lights switched on before the cab trim or panel is reinstalled.
- Clean terminals with a contact cleaner
- Replace a cracked or brittle lens
- Test before reinstalling trim
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12401.08 |
| UPC | 804314142889 |
| Lens | Amber |
| Position | Passenger side |
| Connector | 2-lug type wire connector |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so confirm them against this light before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before fitting, confirm the existing wire connector is a 2-lug type, and inspect the original lens because this light works only with that connector.
What’s included
One passenger side marker light. Plan separately for any bulbs, wiring or hardware your installation needs.
















