Overview
The Omix-ADA 16701.06 (part number OAI16701.06) is a rear brake drum for 10 inch brakes on the 1978-1983 Jeep CJ5, the 1978-1986 CJ7 and the 1981-1985 Scrambler.
It is the brake drum only and is built as a direct OE replacement to the original specifications.
Key features
- Rear brake drum
- For 10 inch brakes
- Brake drum only
- Limited five year warranty.
Before you install
A rear drum sits over the brake shoes and turns with the wheel. On a classic CJ, the friction surface wears gradually, and a worn or grooved surface can reduce stopping power and cause pulsing or drag. Before fitting a new drum, check the inside surface for scoring, cracks around the hub, and out-of-round wear. Measure the drum diameter against the wear limit stamped on the drum or in the service manual for your year.
Drum brakes often need the shoes, springs and wheel cylinder checked at the same time. Worn shoes can glaze a new drum, so replacing them together usually gives a more even fit. Clean the backing plate, lubricate the adjuster threads lightly, and keep grease off the friction material.
- Inspect wheel cylinders for leaks
- Clean dust from the backing plate
- Check the drum for heat cracks
- Replace springs that look stretched
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI16701.06 |
| UPC | 804314035648 |
| Product type | Rear brake drum |
| Brake size | 10 inch |
| Position | Rear |
| Warranty | Limited five year |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1978-1983 Jeep CJ5, the 1978-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler.
Other years and models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear brake drum.
Not included: Shoes and hardware are not included; this is the drum only.









