Overview
The Omix-ADA 17901.02 is a heater core for 1978 to 1986 CJ Jeep vehicles, carrying part number 17901.02 and UPC 804314037666. A heater core is a small radiator-style unit that carries engine coolant so the cabin heater can warm the air. This core is made for use with a 3-speed heater motor.
Key features
- Fits 1978 to 1986 CJ models
- Designed for use with a 3-speed heater motor
- Part number 17901.02 from Omix-ADA
Heater core service tips
The heater core works like a small radiator inside the dash. Hot coolant flows through its tubes while the blower moves air across the fins, so the core acts as a heat exchanger for the cabin. Leaks, clogs or air trapped in the system can reduce heat, which is why a core is often replaced after a coolant smell or a damp floor appears.
Replacing a core is a larger job than most heater parts, since the dash usually has to come apart. Flush the cooling system before reconnecting the new core, and refill with fresh coolant. Check the hoses and clamps on the core, and replace any that are cracked or soft at the same time.
- Flush the system before refilling
- Replace cracked or soft heater hoses
- Check for damp carpet or fogged windows
- Bleed air from the heater circuit after refilling
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17901.02 |
| UPC | 804314037666 |
| Component | Heater core |
| Years | 1978 to 1986 |
| Compatible heater motor | 3-speed |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1978 to 1986 CJ models. Compare your vehicle’s year, model and trim before buying, since other years fall outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drain the engine coolant before removing the heater core, since the core connects to the cooling system.
What’s included
A 3-speed heater motor is not included with the core, so check your motor before installing.
Not included: a 3-speed heater motor, which the core is made to work with.









