Overview
The Mob Armor Mobnetic Pro 90 Mount, part number MOBN-PRO-WO, is a magnetic phone mount that docks a smartphone to the dashboard for easy access and hands-free use.
The mount attaches to the dash with 3M VHB adhesive and holds the device with an industrial strength magnet. The ball housing allows 360 degrees of rotation and 90 degrees of tilt. It is a universal mounting location and fit.
Key features
- Magnetic phone mount with an industrial strength magnet
- Attaches to the dashboard with 3M VHB adhesive
- Ball housing allows 360 degrees of rotation
- 90 degrees of tilt
- Universal for mounting location and fit
Keeping the mount secure
Adhesive mounts depend on the surface underneath. Dashboards made of soft-touch plastic or textured vinyl can carry oils and protectants that stop adhesive from bonding well, and high heat inside a parked car can soften the bond over time. Clean the spot with isopropyl alcohol, let it dry fully, and press firmly for a short time before loading the phone.
Magnet mounts hold best when the phone is not in a thick case. Remove any metal plate or heavy case that sits between the magnet and the phone. Check the grip after a few drives, since bumps and braking can loosen a phone that is not seated properly.
Removing an adhesive mount can damage the dash finish, so plan the spot carefully before peeling the backing. If you move the mount later, warm the adhesive gently with a hair dryer on low heat before lifting it off.
- Clean the dash with alcohol and let it dry
- Keep the phone free of thick cases
- Recheck the grip after the first drives
Specifications
| Brand | Mob Armor |
|---|---|
| Part number | MOBMOBN-PRO-WO (MOBN-PRO-WO) |
| UPC | 75153380240 |
| Product type | Magnetic phone mount |
| Holding method | Industrial strength magnet |
| Attachment | 3M VHB adhesive to the dashboard |
| Rotation | 360 degrees |
| Tilt | 90 degrees |
| Mounting location | Universal |
| Fitment type listed | Universal fit |
Vehicle fitment
The mount is not built for a particular vehicle. Choose a flat, clean dashboard spot where it does not block your view.
Mob Armor warns not to use the mount with Qi wireless charging products or credit card phone cases, because the magnets may harm credit cards. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Clean and dry the mounting surface before applying adhesive, and place the mount where it does not block the driver’s view or airbag deployment zones. Follow local regulations on device use while driving.
What’s included
One Mobnetic Pro 90 mount with 3M VHB adhesive for attaching it to the dashboard.
Not included: A phone is not included. Check that the phone and its case work with a magnetic mount before attaching it.









