Overview
The Mickey Thompson Classic III Replacement Center Cap, part number M/T90000001664, is a replacement wheel center cap from the Classic III line. It carries catalog number 111664 and is a universal fit.
A replacement center cap takes the place of a lost or damaged cap on the wheel. No diameter, finish or material is stated, so verify the size against your wheel before fitting it.
Center caps and the hub
A center cap covers the hub area in the middle of the wheel, keeping dirt and water out of the bore and hiding the hardware behind it. Most caps press or snap into the bore and rely on a tight fit around the rim. When the rim is worn, the cap can pop out on rough ground and be lost.
Replacing a cap is usually simple, but the bore should be clean and free of burrs before the new cap goes in. Press the cap in evenly with the palm of your hand rather than tapping one edge. If the old cap was cracked or deformed, do not reuse it, since a damaged rim will not hold the new cap in place.
- Clean the bore before fitting
- Check the rim for flattening or cracks
- Press the cap in evenly
Specifications
| Brand | Mickey Thompson |
|---|---|
| Product line | Classic III |
| Part type | Replacement center cap |
| Part number | M/T90000001664 |
| Catalog number | 111664 |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit with no specific vehicle named. Measure your wheel’s center bore and cap seat before fitting it.
No vehicle is named for this replacement center cap. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the number of pieces in the package before ordering.










