Overview
The Mickey Thompson Classic III replacement center cap, part number 90000001588, is a wheel center cap for the Classic III line. It covers the hub of the wheel and is a universal fit, so it is not tied to a specific year, make or model.
Fitting a wheel center cap
A center cap covers the hub area of the wheel, keeping dirt and water out of the center bore and protecting the metal from corrosion. It also gives the wheel a finished look when the hub is visible through the spokes. Because the cap sits inside the center bore, the bore size and hub design decide whether it seats properly, which is why a universal fit cap still needs a check against the wheel before it goes on.
Seating is the step most often missed. A cap that is not pressed fully home can work loose on rough ground, while a cap forced into a bore that is too small can crack or deform. After the first few drives, recheck that the cap sits flush and has not moved. Keep a spare cap or retaining clip on hand when running off-road, since a single lost cap is easy to overlook.
- Measure the center bore before fitting
- Press the cap in evenly until it sits flush
- Recheck seating after the first few drives
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | 90000001588 |
| UPC | 787025481365 |
| Product type | Wheel center cap, replacement |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit cap. Check it against your wheel’s center bore and hub design before installing. Confirm fit for your vehicle’s year, model and trim before ordering.












