Overview
The MasterTop ShadeMaker Freedom Mesh Bimini Top Plus in black, part number MAS14201601, is a two-piece mesh bimini top for the 2018 to 2019 Jeep Wrangler JL four-door. It attaches to the sport bars with straps and quick release buckles, and it shades the driver, the front seat passenger and the rear seat occupants without a header channel. It suits owners who want sun protection while keeping an open air feel.
ShadeMaker mesh tops use extra durable commercial grade mesh. The mesh blocks up to 70% of the sun’s harmful UV rays. A bimini of this type can stay installed under a soft top or hardtop. Front and rear mesh sections can run together, or only the front section can shade the driver and passenger.
Key features
- Two-piece design with front and rear mesh sections.
- Attaches to the sport bars with straps and quick release buckles.
- No header channel required to install.
- Heavy-duty webbing on the edges for durable attachment points.
- Blocks up to 70% of the sun’s harmful UV rays.
- Easy access to remove or install the factory freedom panels without removing the top.
Shade without a header
A mesh bimini trades full coverage for airflow. It works well when you want sun on your head and shoulders but still want the breeze and a view of the sky. Because it clamps to the sport bars, the fit depends on how firmly the buckles seat, so give each strap a tug before driving and retighten after any rough trail section.
Mesh tops collect dust and grit over time. Brush them out with a soft brush, rinse gently and dry before folding. Check the sport bar clamps and webbing edges every few outings, since heavy-duty webbing still stretches under repeated load. If the mesh shows tears near the edges, replace the panel before it spreads.
- Keep the quick release buckles clean and free of grit
- Store the panels dry to avoid mildew
- Recheck strap tension after the first few drives
Specifications
| Brand | MasterTop |
|---|---|
| Part number | MAS14201601 |
| Product type | Freedom Mesh Bimini Top Plus, two-piece |
| Material | Extra durable commercial grade mesh |
| Color | Black mesh |
| UV blocking | Up to 70% |
| Coverage | Front and rear |
| Header | Not required |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes the 2018 to 2019 Jeep Wrangler (JL) four-door, covering Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S models.
It fits 2018 to 2019 Jeep Wrangler JL four-door models, including Unlimited Rubicon, Sahara, Sport and Sport S. Confirm fit against your year, model and trim before you order.
Installation notes
Because no header channel is needed, the top is fixed to the sport bars with straps and quick release buckles rather than along the windshield. The reinforced side straps are placed so the factory freedom panels can be removed or installed without taking the top down. Check that every quick release buckle is fully engaged before driving.
What’s included
The top is a two-piece design with straps and quick release buckles for attachment.










