Overview
The MasterTop Bimini Top in Spice Denim, part number 14103137, is a summer soft top that shades the driver and passenger from sun and sudden showers. It is designed for Jeep open air driving and attaches to the front of the vehicle without drilling.
The top attaches with straps, buckles and hook and loop fasteners and works with sport bar mounted grab handles. An over the door mount is offered for Jeeps with factory soft top door surrounds, for 97 to current models. The top is designed for Wranglers in two generations, and a windshield channel or header is needed at the front.
Key features
- Spice Denim colorway
- No drill installation using straps, buckles and hook and loop fasteners
- Works with sport bar mounted grab handles
- Over the door mount for Jeeps with factory soft top door surrounds, for 97 to current models
- Only Original Equipment approved fabrics are used in MasterTop’s Bimini tops.
- Protects against sudden showers and sun
Choosing a mounting setup
Mounting a soft top to a sport bar puts load on the bar at the strap points, so inspect the bar before every install. Look for cracks, bends or loose mounting hardware. A bar that moves under light pressure will let the top sag and rub, so tighten the connections and make sure the bar is solidly fixed to the frame.
Grab handles and door mounts share the same bar space. Position the handles so they do not crowd the straps, and plan the door mount on the side that suits your door surround. Mark where each piece sits before tightening, so the top keeps a level line once installed.
- Check bars for cracks and bends
- Keep straps clear of grab handle clamps
- Tighten hardware after the first drives
- Replace worn hook and loop fasteners
Specifications
| Brand | MasterTop |
|---|---|
| Part number | 14103137 |
| UPC | 818068020027 |
| Color | Spice Denim |
| Fabric | Original Equipment approved fabric |
| Mounting | No drill; straps, buckles and hook and loop fasteners |
| Required accessory | Windshield header channel, sold separately |
| Warranty | 3 year limited warranty |
Vehicle fitment
Fit is not confirmed for a specific vehicle. The top is designed for Jeep Wranglers, which require a windshield channel on 87-95 models and a no drill windshield header on 97-current models.
The top is made for Wranglers, so Cherokee, Gladiator and other models should be checked separately. Confirm your vehicle’s year, model and trim, and match the windshield channel or header to your Wrangler generation before ordering.
Installation notes
The top mounts with straps, buckles and hook and loop fasteners with no drilling. Install the windshield channel or header at the front of the Jeep before fitting the top, since the top attaches to it.
What’s included
The kit centers on the Bimini top. Verify the contents match what your install needs before you begin.
Not included: The windshield header channel is required and sold separately.
















