Overview
The K&N HP-2004 is a wrench-off canister oil filter for engines of 2.5L, 4.0L, 4.7L, 5.2L, 5.9L and 6.1L. It is a direct-fit replacement intended to take the place of OE oil filters.
Flow runs 40% higher than OE-style filters, and bursting strength is 40% higher as well. It uses resin-impregnated media in a heavy-duty build for synthetic and conventional oil.
Key features
- Filter media is resin-impregnated and captures 99% of harmful contaminants
- Exposed 1 in. nut makes removal easier
- Anti-drainback valve on applicable designs stops oil draining into the crankcase at shutdown
- Heavy-duty build for extreme conditions
- Works with synthetic and conventional oils
- Higher flow than OE-style filters
Removing a wrench-off filter
Wrench-off filters are the easiest to change on a crowded engine because the exposed nut gives a solid grip. Place a drain pan under the filter first, since the filter holds a meaningful amount of oil. Loosen it slowly, and watch the gasket so the old seal does not stick to the new filter.
Before installing a new canister, wipe the mounting surface clean and lightly oil the new gasket. Thread it on by hand until the gasket seats, then tighten it as the filter’s markings or instructions direct. Run the engine briefly and watch for leaks, and check the oil level after the filter has filled.
- Use a drain pan
- Wipe the mounting surface clean
- Check for leaks after the first run
Specifications
| Brand | K&N |
|---|---|
| Model number | HP-2004 |
| UPC | 24844035011 |
| Filter type | Wrench-off canister oil filter |
| Filter media | Resin-impregnated |
| Exposed nut | 1 in. |
| Engines | 2.5L, 4.0L, 4.7L, 5.2L, 5.9L, 6.1L |
| Flow rate | 40% higher than OE-style filters |
| Bursting strength | 40% higher than OE-style filters |
| Oil type | Synthetic and conventional |
Vehicle fitment
Match your engine size against the sizes covered, then confirm your vehicle’s year, make and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item covered is the oil filter itself; confirm the package contents before installation begins.












