Overview
The K&N KN-171B is a canister-style powersports oil filter offered as an O/E replacement for most cars, trucks, SUVs, motorcycles and ATVs.
It uses resin-impregnated media that K&N says traps 99% of harmful contaminants. The anti-drainback valve (where applicable) stops oil draining into the crankcase during shutdown, and the flow and bursting strength are each rated 40% higher than OE style filters.
Key features
- Resin media traps 99% of harmful contaminants
- Heavy duty build suited to extreme conditions
- Flow 40% higher than OE style filters
- Bursting strength 40% higher than OE style
- Anti-drainback valve where applicable helps prevent dry starts
- Suitable for synthetic and conventional oil
- 1 in. exposed nut for easy filter removal
Oil change routine
A canister oil filter sits between the engine and the oil system, catching debris before it circulates to bearings and moving parts. As the media loads with particles, its flow becomes less efficient, so replacing the filter at each oil change keeps lubrication working as intended. Canister designs seal differently from spin-on cartridges, so the gasket and housing should be checked every time.
The exposed nut on this style makes removal simpler once the engine is warm and oil is still moving. Hot oil drains quickly, so place a catch pan beneath the filter first. Before fitting the new element, wipe the mounting surface clean and lightly oil the seal. Tighten by hand until the gasket touches, then add a firm final turn without overdoing it. Run the engine briefly and check for leaks.
- Inspect the sealing ring for cuts or flattening
- Keep the catch pan in place during removal
- Recheck the oil level after the engine settles
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | KN-171B |
| UPC | 24844087737 |
| Filter style | Canister |
| Filter media | Resin-impregnated |
| Exposed nut | 1 in. |
| Oil type | Synthetic and conventional |
Vehicle fitment
It is a universal fit filter with no specific vehicle years, makes or models identified. Confirm fit for your vehicle’s year, model and trim before ordering, and match the part number to your engine before installation.
Confirm your vehicle’s year, model and trim before ordering.









