Overview
The K&N 63-9025 is a 63 Series Aircharger cold air intake kit for the 2005–2011 Toyota Tacoma in Base, Pre Runner and X-Runner trims. The kit pairs a partial enclosure housing with a free-flowing polyethylene tube and a washable oil-type filter, giving Tacoma owners a full intake replacement instead of a filter-only upgrade.
K&N presents its intake line as complete replacements for the factory airflow assembly, including the filter, air box and air path. Its literature points to power that a well-built intake can free up, and the company names an estimated gain of 10 HP for this kit. K&N also reports supplying more than 500,000 air intakes each year.
Key features
- Estimated 10 HP gain.
- Inlet tube included with the kit
- Free-flowing high density polyethylene tube
- Washable, reusable filter that K&N rates for lifetime service
- Partial enclosure housing with a cold air intake design
- Covered by the K&N Million Mile Warranty
- Designed and made in the U.S.A.
Air filter care and driving
A cold air intake draws air from a cooler point than the stock airbox, which can help the engine breathe more freely. The airflow change also moves air past the mass airflow sensor, so the sensor and the filter need attention after installation. A well-sealed inlet tube and clean filter help keep the air path consistent from the filter to the throttle.
Oiled filters need care. Too much oil, or oil that migrates onto the sensor, can affect readings, so clean the filter and oil it lightly. Off-road dust and water can also work into the housing, so inspect the tube and clamps regularly and check the housing seal after rough trails.
- Clean the filter before oiling to avoid residue on the sensor
- Inspect the inlet tube for cracks after rough off-road use
- Check the housing seal after washing the filter
- Confirm the tube clears the engine bay before driving
Specifications
| Brand | K&N |
|---|---|
| Part number | 63-9025 |
| UPC | 24844112149 |
| Product type | Aircharger cold air intake kit (63 Series) |
| Inlet tube | Included |
| Tube material | High density polyethylene |
| Filter housing type | Partial enclosure |
| Intake type | Cold air |
| Filter type | Oil, washable and reusable |
| Fitment type | Direct fit |
| Estimated horsepower gain | 10 HP (K&N estimate) |
| Warranty | K&N Million Mile Warranty |
| Road use | Not legal for highway use in states adopting California emission regulations |
Vehicle fitment
It is a direct-fit part for the 2005–2011 Toyota Tacoma in Base, Pre Runner and X-Runner trims.
Tacoma model years before 2005 and after 2011 are not covered, and the 4Runner kit (63-9023) is a different part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation usually takes 90 minutes or less, and the inlet tube is included. Check all clamps and connections after installation because the intake changes the air path. This kit is not legal for highway driving in California emission regulation states.
What’s included
The kit includes the inlet tube, the oiled filter and the partial enclosure housing. Not included: The kit consists of the inlet tube, filter and housing only.









