Overview
The Kargo Master 60321 is a stand-off bracket for roof rack load bars. It lets you set a load bar at any point along the length of a 1-5/8 inch tube, and it bolts and positions along the Congo Pro and Congo Cage bar. The bracket can also attach to larger 1-5/8 inch diameter KMS K-Rails, which adds flexibility when laying out a rack.
The bracket is made of aluminum and is a universal fit mounting accessory rather than a vehicle-specific part. Compatibility depends on your bar or rail diameter.
Key features
- Positions a load bar anywhere along a 1-5/8 inch tube
- Bolts to Congo Pro and Congo Cage bars
- Attaches to 1-5/8 inch diameter KMS K-Rails
- Drilling is not required
- Aluminum construction
Setting up a roof rack layout
A stand-off bracket raises a load bar off the rack rail so cargo can sit where it fits best. Positioning the bars before final tightening makes it easier to balance weight across the roof and keep the rear hatch and doors clear.
Before mounting, inspect each bar, tube and fastener. Look for bent tube, damaged threads and corrosion at clamp points. Aluminum parts can gall when fasteners are overtightened, so tighten evenly and recheck everything after the first few drives. Mixing parts from different rack systems can change how the load is carried, so keep components from one system together.
- Confirm tube diameter on every bar and rail before buying
- Retighten clamps after the first few drives
- Keep clamp faces clean and free of grit
- Keep cargo within the rack’s rated load
Specifications
| Brand | Kargo Master |
|---|---|
| Part number | 60321 |
| UPC | 700007526761 |
| Material | Aluminum |
| Drilling required | No |
| Fitment | Universal Fit |
| Compatible tube size | 1-5/8 inch diameter |
Vehicle fitment
It is a universal fit bracket, so it is not matched to a model year, make or model. Match it to your roof rack bars and rails by tube diameter, and confirm your rack setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your load bar or K-Rail is 1-5/8 inch diameter before mounting, because the bracket is sized for that tube.












