Overview
The Kargo Master Congo Pro Front and Rear Hoop Kit, part number 55027, is a steel tubular hoop assembly for the 2007–2016 Jeep Wrangler JK. It connects to the Congo Pro Roof Rails (PN# 55020 and 55025) and completes the rigid assembly of the Congo Pro Cage system (PN# 55000 and 55010). The hoop is clamped to the roof at the top and mounted to the frame or bumper at the base.
The hoop leaves room for other accessories, including loading racks, grab handles, light kits and standoff brackets. Frame mount brackets for the stock rear bumper are included.
Key features
- Heavy-duty 2 inch diameter by .120 inch steel tube
- Black powder coat finish that Kargo Master says will not fade or dull
- Low clearance design
- Industrial grade fasteners for strength and corrosion resistance
- Built to carry optional platforms
- Accessory brackets available for mounting additional components
- Frame mount kits included
- Nationwide lifetime frame warranty.
Bumper and frame mounting basics
Hoop kits that mount at the base depend on a secure attachment to the frame or rear bumper. Check the mount points for cracked paint, bent brackets or loose hardware before adding any load. Confirm the hoop sits square over the roof rails before final tightening, since a skewed hoop puts uneven stress on the rails and clamps.
Bumper mounts see more movement than roof mounts, especially on trails with articulation. Recheck the brackets after the first few drives and after any hard off-road section. Use a threadlocker on bolts that face repeated movement, and keep mounting surfaces clean to limit corrosion.
- Verify square alignment before final tightening
- Recheck bumper brackets after hard trail use
- Inspect powder coat around mount points
- Keep mounting surfaces clean and dry
Specifications
| Brand | Kargo Master |
|---|---|
| Part number | 55027 |
| UPC | 700007526551 |
| Material | Steel tube |
| Tube size | 2 inch diameter x .120 inch |
| Finish | Black powder coat |
| Drilling | Minimal drilling required for bumper mount attachment |
| Warranty | Nationwide lifetime frame warranty |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler (JK), including the 70th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and their Unlimited versions.
Wrangler TJ, LJ and JL models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minimal drilling is needed at the bumper mount attachment. The hoop connects to the Congo Pro Roof Rails, so those rails should be in place first. Use the included frame mount brackets when mounting to the stock rear bumper. Secure all loads before driving, since roof-mounted weight raises the center of gravity.
What’s included
Front and rear hoop kit with frame mount kits and frame mount brackets for the stock rear bumper.
Not included: Congo Pro Roof Rails, Congo Pro Cage components (PN# 55000 and 55010), and accessories such as loading racks or light kits.














