Overview
The JW Speaker Model 6040 LED work light, part number 3157591, is designed to retrofit PAR36 work lights as an upgrade over bulb-based units.
The Model 6040 is offered in multiple voltage configurations, beam patterns and lens materials. Confirm the voltage, beam pattern and lens material for part number 3157591 against your needs before ordering. It is a universal fit.
Key features
- LED work light
- Designed to retrofit PAR36 work lights
- It is an upgrade over bulb-based work lights.
- Available in multiple voltage configurations
- Available in multiple beam patterns
- Available in multiple lens materials
- Universal fit
Mounting and wiring basics
Work lights mounted on a bumper, roll bar or cab roof take heavy vibration, so the mounting bracket and its fasteners need regular attention. Before drilling or clamping anything, confirm the light sits clear of the hood, bars and any moving parts, and that the beam will not shine into the cab.
When a bulb-based light is swapped for an LED unit, the wiring path usually stays the same, but the load and the connector need checking. Plan the switch location and the route for the cable, and keep the power feed short and protected near the battery.
- Check the mounting footprint before drilling
- Use a fuse close to the power source
- Seal connections against moisture and road spray
- Test the light on the bench before final mounting
Specifications
| Brand | JW Speaker |
|---|---|
| Model | 6040 |
| Part number | 3157591 (also written J/W3157591) |
| Product type | LED work light |
| Retrofits | PAR36 work lights |
| Fit type | Universal |
Vehicle fitment
The Model 6040 is a work light and is not vehicle-specific, so no vehicle fitment applies. It is a universal fit.
Confirm the voltage, beam pattern and lens material for part number 3157591, and make sure it suits your PAR36 mounting and your vehicle’s electrical system.
Installation notes
Disconnect the battery before working on vehicle wiring or electrical connectors, and follow the installation steps for the light. Use correctly rated wiring and fusing for any electrical device, and route wires away from heat, sharp edges and moving parts.
Test the circuit before relying on it, and re-check connections after the first miles of driving. Check local regulations before using lighting or other electrical equipment on public roads.
What’s included
- Model 6040 LED work light
Not included: wiring, a switch, a relay, fuses or mounting hardware.









