Overview
The Jeep NP231 locating dowel, part number 4116310, is a locating dowel for NP231 transfer cases. Two are required per application.
The dowel fits the 1987, 1991 and 1994 Jeep Cherokee (XJ), the 1998 Jeep Wrangler (TJ) Sport and the 2006 Jeep Wrangler (LJ) Unlimited Rubicon. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Two required per application
- Jeep part number 4116310
- Fits specific XJ, TJ and LJ vehicles by year and trim
- Labeled universal fit by Jeep
Dowel holes and seating
Locating dowels set the position of the transfer case against its mounting face, so they keep the output shafts and driveshaft angles where the design intends. A dowel that is loose, bent or worn can let the case shift slightly, which often shows up as vibration, a leak at the gasket or noise from the drivetrain.
Inspect the holes as well as the dowels. An elongated or damaged hole can keep a new dowel from seating fully, so clean the holes and check them with a straightedge or the old dowel before assembly. Drive the dowel in gently with a soft mallet rather than forcing it.
Replace dowels in matched pairs when the case is opened for other work, and tighten the case bolts evenly in the correct sequence after the dowels are seated. Recheck for leaks after the first few drives.
Specifications
| Brand | Jeep |
|---|---|
| Part number | 4116310 |
| UPC | 70000363550 |
| Quantity | 2 required |
| Fitment label | Universal fit |
Vehicle fitment
Listed fitment covers the 1987, 1991 and 1994 Jeep Cherokee (XJ) with Base, Limited and Sport trims, the 1998 Jeep Wrangler (TJ) in Sport trim, and the 2006 Jeep Wrangler (LJ) in Unlimited Rubicon trim.
Fit is confirmed only for the years and trims named above, so check your vehicle before ordering.
What’s included
Two locating dowels are needed per application. Check the package contents against your installation before starting, and confirm the quantity first.









