Overview
The Jeep 4636359 is an OEM front parking light socket for the 1994–1995 Jeep Wrangler (YJ), sold as a splice-in replacement.
It replaces a parking light socket that is broken or corroded. Only the socket is supplied, with no bulb or pigtail.
Key features
- OEM replacement front parking light socket
- Splice-in design joins the existing wiring
- Intended for broken or corroded sockets
- It fits 1994–1995 Jeep Wrangler (YJ) models in the Renegade, Rio Grande, S, SE and Sahara trims.
Before you splice in
A parking light socket holds the bulb and connects it to the car’s lighting circuit. When the socket corrodes, the bulb may flicker, dim or fail to seat, and the metal contacts can start to overheat. Inspect the wiring behind the socket as well as the socket itself. Green or white crusty residue, brittle insulation and discolored wire ends usually mean moisture has been getting in, so the repair may need to go further back than the socket alone.
A splice-in socket asks for a bit more care than a plug-in one. Strip the wire back to clean copper, make a solid mechanical joint, and cover each splice with heat-shrink tubing or weatherproof connectors so water cannot wick along the strands. Test the light with the ignition on before reassembling the lens and trim.
Bulbs are often replaced at the same time. An old bulb that has sat in a hot, damp socket may have a corroded base, so inspect it and use a fresh one if it looks worn.
- Clean contacts with a wire brush before fitting
- Seal every splice against moisture
- Check the lamp with the ignition on before reassembling
Specifications
| Brand | Jeep |
|---|---|
| Part number | 4636359 |
| UPC | 70000363560 |
| Part type | Front parking light socket |
| Installation | Splice in |
| Replacement type | OEM |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1994–1995 Jeep Wrangler (YJ) in the Renegade, Rio Grande, S, SE and Sahara trims.
Earlier YJ years and TJ, JK and JL models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a splice-in socket, so it joins the existing parking light wiring rather than plugging into a connector. Disconnect the battery before splicing.
What’s included
The package contains the socket only.









