Select your vehicle

Hellwig Sway Bar – 7252

Hellwig

Shop Hellwig Sway Bar Assemblies on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Hellwig rear sway bar, part number 7252
  • 1.5 in. bar diameter
  • Bolt-on installation, automatic type with single spring rate
  • Mounts at the rear; vehicle fitment not listed

Description

Overview

The Hellwig 7252 is a rear sway bar with a 1.5 in. bar diameter and bolt-on installation. A sway bar, also called an anti-roll bar, links the left and right sides of the suspension to limit body roll in corners. It is an automatic type with a single spring rate.

Its design focuses on handling, with a quick bolt-on installation.

Key features

  • Rear-position sway bar
  • 1.5 in. bar diameter
  • Quick bolt-on installation
  • Automatic type with single spring rate
  • Hellwig says drivers should notice an immediate improvement through the first corner

Rear sway bar basics

A rear sway bar controls how the back of the vehicle leans during turns. It couples the left and right suspension through a torsion arm, so it resists roll when one wheel rises and the other drops. Changing its diameter changes stiffness, which affects how the rear tires hold the road and how the vehicle settles over bumps.

An automatic type with a single spring rate means one stiffness setting, so the bar works the same way in all conditions. Bushings and end links are common wear points, so inspect them at each service. Check the bar for cracks, bent arms and corrosion, and keep the mounting points clean before installing.

Rear sway bars interact with the rear shocks and springs, so a change in bar stiffness can alter ride feel. Make the installation in one session and recheck the bolts after a short drive to confirm everything has settled.

Specifications

Brand Hellwig
Part number 7252
UPC 70000636618
Position Rear
Bar diameter 1.5 in.
Spring rate Single rate
Type Automatic
Installation Bolt-on

Vehicle fitment

Match your vehicle’s year, make and model to the bar before ordering.

Compare the rear mounting points on your vehicle with the bar before ordering, and confirm the year, model and trim first.

Installation notes

Support the vehicle on jack stands, not a jack alone, before working under it. Keep the rear axle supported while the bar is bolted in place.

What’s included

Check the package contents against your installation when the bar arrives, and have the mounting hardware ready before starting.

SKU: HEL7252 Category:

Specification

Shipping weight 44.00 lbs
Package dimensions 42.00 × 24.50 × 5.00 in
brands

Questions & Answers

What is the Hellwig 7252?

The Hellwig 7252 is a rear sway bar with a 1.5 in. bar diameter, made by Hellwig. It is an automatic type with a single spring rate and uses bolt-on installation, with UPC 70000636618.

Will the Hellwig 7252 fit my vehicle?

Match your year, make, model and trim to the bar before ordering, and compare the rear mounting points with it before fitting.

Does the Hellwig 7252 include hardware?

Check the package contents on arrival and compare them with your installation plan before starting. Have the mounting hardware and tools ready before you begin work on the rear suspension.

Does a rear sway bar need an alignment check?

Usually no, since a rear bar does not change steering geometry. Check the mounts and bushings after installing, and recheck the bolt tightness once the vehicle has been driven a short distance.

How long do sway bar bushings last?

Service life depends on driving conditions, road salt and how often the vehicle sees rough ground. Inspect bushings at regular service intervals and replace them when they crack, split or allow clunking.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Hellwig Sway Bar Assemblies on Amazon