Overview
The Hella H87988361 is a smoke (tinted) Color Shieldz film from the Rallye 4000 range, a removable stick-on film for lamp lenses. The pre-cut shape suits common lamps and can be trimmed to custom shapes. It does not replace a clear cover, though it guards against pitting and chips. The film is sold in pairs as a universal-fit product.
Key features
- Smoke (tinted) finish for a darker look
- Removable, stick-on film
- Pre-cut for common lamps and easy to trim
- Layer of protection against pitting, scratches, cracks and chips
- Sold in pairs
Protecting lamp lenses over time
Lamp lenses wear gradually from road grit, sand and washing. A protective film takes the first hits, so small pits and chips land on the film rather than on the lens underneath. When the film becomes worn, replacing a piece is far simpler than dealing with a scratched lens.
Removing an old film is usually straightforward. Warm the edges gently, lift a corner and peel slowly. Residue can be cleaned with a mild soap solution and a soft cloth, and the lens should be dried fully before a new piece goes on. Check the edges regularly, especially after gravel roads, because lifted corners let dirt get under the film and cloud the view.
- Check film edges after off-road trips
- Clean the lens fully before reapplying
- Replace torn or cloudy film promptly
Specifications
| Brand | Hella |
|---|---|
| Part number | H87988361 |
| UPC | 760687104735 |
| Product line | Color Shieldz Rallye 4000 |
| Color | Smoke (tinted) |
| Also available in | Clear, yellow, blue |
| Quantity | Pairs |
| Fitment | Universal fit |
Vehicle fitment
This smoke film is a lighting accessory and is not vehicle-specific. Hella’s pre-cut shape is aimed at common lamps, so measure the lamp before trimming.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trim the pre-cut film first if the lamp needs a different shape, then apply it.
What’s included
Sold in pairs.
Not included: a clear cover, because the film does not stand in for one.









