Overview
The Edge EAS Control Kit 98616 is a diesel truck kit that pairs exhaust gas temperature (EGT) monitoring with a digital power switch for accessories. It is designed for daily diesel driving and for towing, since towing strains a truck and can push its temperatures up. Part number EDG98616 is universal fit, without a specific make, model or year.
The EGT probe reads exhaust gas temperature, which Edge says helps confirm that added power is not creating excessive heat that could damage the engine. The on/off power switch is intended for accessories such as aftermarket lights and air compressors, and it can be operated from the Dashpaq+ device.
Key features
- EGT probe for monitoring exhaust gas temperatures
- Digital on/off power switch for multiple accessories
- Dashpaq+ screen layout monitors up to 6 gauges and 4 rocker switches
- MyStyle software or the Dashpaq+ renames each accessory
- EAS daisy chain link system for switching several accessories
Wiring accessories safely
Power switching kits like this one run accessories through the vehicle’s electrical system, so the wiring matters as much as the controller. Each accessory should have its own fuse and wire sized for its current draw. Route the wiring away from heat, moving parts and sharp edges, and secure it so it cannot chafe.
Diesel trucks already carry heavy electrical loads, so plan which accessories will run together before wiring them to one switch. Add a relay for high-draw accessories such as air compressors rather than sending full current through the switch. Test each circuit with the engine off before running it while driving, and keep a note of which switch controls each accessory.
- Fuse each accessory separately
- Use relays for high-current loads
- Label every switch position
Specifications
| Brand | Edge |
|---|---|
| Part number | EDG98616 |
| Monitoring | Exhaust gas temperature via EGT probe |
| Power control | Digital on/off switch for multiple accessories |
| Display device | Dashpaq+, up to 6 gauges and 4 rocker switches |
| Fitment type | Universal fit |
Vehicle fitment
Universal fit means the kit is not tied to a particular make, model or year. It is aimed at diesel trucks, but compatibility depends on your truck’s sensors and wiring, so check it against your setup before installing.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit combines a temperature probe with power switching, so plan the probe placement and accessory wiring before you start. The EAS daisy chain link system lets one switch feed several accessories. Disconnect the battery before working on any power circuit.
What’s included
The kit includes an EGT probe, a digital power switch and an EAS daisy chain link system.
Not included: Accessories such as lights and air compressors are separate items. Check whether a Dashpaq+ device is needed for your setup before ordering.









