Overview
The Dorman 645-704 is a blower motor resistor harness with 12-gauge wire and five butt connectors. It fits 2002 to 2007 Jeep Liberty (KJ), 2004 to 2006 Jeep Wrangler (LJ) and 2002 to 2006 Jeep Wrangler (TJ). The harness plugs into the blower motor resistor.
Resistor connectors can corrode and overheat, and this harness is a replacement connection for the resistor circuit.
Key features
- 12-gauge wire
- Includes one harness and five butt connectors
- Plugs into the blower motor resistor
- Fits KJ, LJ and TJ models
Inspecting the resistor connection
The resistor sits in the airflow of the blower, so its connection sees heat and vibration every time the fan runs. Corrosion at the terminals raises resistance, which can cause uneven fan speeds or a burnt plug. Before connecting the new harness, look for brittle insulation, discolored terminals and loose crimps on the old wiring.
Crimped butt connectors work best when the wire is stripped cleanly and the crimp is firm. Route the harness so it clears the heater housing and does not rub against sharp edges. Disconnect the battery before working on the heater wiring, and reconnect only after the plug seats fully.
- Check terminals for green or brown discoloration
- Look for brittle insulation near the connector
- Confirm the harness routing clears the heater housing
Specifications
| Brand | Dorman |
|---|---|
| Part number | 645-704 |
| UPC | 37495296366 |
| Wire gauge | 12-gauge |
| Included | One harness, five butt connectors |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2002 to 2007 Jeep Liberty (KJ) in 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims; the 2004 to 2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims; and the 2002 to 2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Not covered: Liberty models after 2007 and Wrangler TJ models from 1997 to 2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The harness plugs into the blower motor resistor. Disconnect the battery before working on the heater wiring.
What’s included
The part includes one harness and five butt connectors. Compare the kit with your installation before starting.












