Overview
The Design Engineering Boom Mat XL Damping Material, part 50224, is a 4mm thick vibration damping sheet for interior panels. It has a 4 mil aluminum stiffening top skin over an asphalt-free, pure butyl noise constraining layer, and it is a universal fit sheet.
Boom Mat stops panel noise by trapping vibration between the aluminum skin and the butyl layer. The adhesive is no-sag on vertical and overhead surfaces and holds in extreme temperatures. The XL is 166% thicker than the original Boom Mat damping material and is designed for 25–50% coverage of the panel area, which saves weight, material cost and installation time. It suits custom car builds and restoration work.
Key features
- 4mm thick, 166% thicker than the original Boom Mat damping material
- 4 mil aluminum stiffening top skin
- Asphalt-free pure butyl noise constraining layer
- No-sag adhesion on vertical and overhead surfaces
- Designed for 25–50% coverage of the panel area
- Built for commercial and sound competition applications
Applying damping sheet to panels
Damping sheet works best on flat, solid panels where vibration shows up as rattle or drumming. The aluminum skin stiffens the panel while the butyl layer turns vibration into a small amount of heat that dissipates. Plan the layout before peeling any backing: mark the panel, decide which areas carry the most noise, and cut the sheet so it stays clear of seam edges and moving parts.
Clean the panel thoroughly, since oil or dust under the sheet weakens the bond. Roll the sheet firmly with a hand roller to push out trapped air, working from the center outward. Panels that flex under hand pressure benefit most, while already stiff panels gain less. Give the adhesive time to settle before reinstalling trim or carpet that presses against it.
- Clean and degrease the panel before application
- Cut around fasteners and wiring
- Roll from the center outward to remove air
- Check edges after the first warm drives
Specifications
| Brand | Design Engineering Inc |
|---|---|
| Part number | 50224 |
| Model type | 4-door |
| Thickness | 4mm |
| Top skin | 4 mil aluminum |
| Constraining layer | Asphalt-free pure butyl |
| Recommended coverage | 25–50% |
| Fitment type | Universal fit |
Vehicle fitment
The sheet is not sized for one vehicle, so measure the panel area you plan to cover before deciding how much to use. It works on interior panels generally.
It is a universal fit sheet rather than a part sized for one vehicle. Confirm fit for your vehicle’s year, model and trim before ordering, and plan coverage around the size of each panel.
Installation notes
Per the manufacturer, the adhesive holds on vertical and overhead panels without sagging. Plan coverage around the 25–50% figure rather than covering every panel fully.
What’s included
One Boom Mat XL damping material sheet, part 50224.









