Overview
The Decked Bed Organizer 58 in Core Trax 1000 tie-down track set, part number AT2, is a silver aluminum track that mounts on top of a DECKED unit to add extra hold points for tie-downs.
The track measures 58 in long, 1.3 in wide and .4 in tall and can run toward the cabside or the tailgate side of the bed. It is custom manufactured to line up with the steel tubes in a DECKED deck part, and attachment loops can be placed at 1 in increments along its length.
Key features
- 6061-T6 aluminum alloy, powder coated silver
- Attachment loops placed at 1 in increments
- Beveled 45 degrees at both ends to avoid snagging gear
- Aligns with the steel tubes in a DECKED deck part
- Runs toward the cabside or tailgate side of the bed
Mounting and alignment tips
A tie-down track gives cargo a fixed anchor point, so its value depends on staying put under load. Before mounting, set the track where the attachment loops will sit over the gear you carry most often. Test the position by moving a few tie-down straps through the loops and checking that they pull at the angle you expect. Once the track is fastened, look at the mounting points after the first few trips, since bumps and shifting cargo can loosen hardware on any bed-mounted accessory.
Aluminum tracks resist corrosion, which suits a bed exposed to rain, road salt and washing. Powder coating helps protect the surface, but scratches from sliding cargo can expose metal over time. Wipe grit from the channel and inspect the coating for chips a few times a year, and touch up small areas before they spread.
- Check fastener tightness after the first few trail runs
- Keep loops clear of sharp edges when sliding cargo
- Inspect the finish for chips near the mounts
- Use straps rated for the load you carry
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | AT2 |
| UPC | 851945005274 |
| Track length | 58 in |
| Track width | 1.3 in |
| Track height | .4 in |
| Material | 6061-T6 aluminum alloy |
| Finish | Powder coated silver |
| Loop spacing | 1 in increments |
| End shape | Beveled 45 degrees at both ends |
Vehicle fitment
The track is custom made to align with DECKED deck tubes, so match it to your DECKED unit before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the track is custom made to line up with the DECKED steel tubes, check the alignment against your deck before mounting it.
What’s included
The 58 in track set. Check the package contents against your installation before starting.









