Overview
The Decked Bed Organizer 48 in Core Trax 1000 track set, part number AT1, is a pair of aluminum T-tracks that mount to a DECKED truck bed. They give Yakima or Thule rack systems a low-profile attachment point, and the 48 in track is made for a DECKED short bed unit.
Each track measures 48 in long, 1 5/8 in wide and .45 in tall. It can be oriented toward the cabside or the tailgate side of the bed and is custom made to line up with the steel tubes in the DECKED deck.
Key features
- 6063 T5 aluminum alloy construction
- Anodized clear finish
- Low-profile T-track for Yakima or Thule racks
- Aligns with the steel tubes in the DECKED deck
- Can run cabside or tailgate side of the bed
Rack and track planning
Track-mounted racks depend on how the tracks line up with the bed. Before fastening anything, decide whether the tracks will run along the cabside or the tailgate side, and test the position with the rack footings on the bed floor. Mark the position lightly with tape before committing. A small shift can change how the rack clamps, so take the time to check alignment first.
Once the tracks are in place, plan the rack and load together. Heavier cargo should sit low on the rack and centered between the tracks, and straps should run to fixed points rather than loose edges. Check the mounting screws after the first few drives, since road movement can loosen fasteners over time.
- Confirm track direction before tightening
- Keep heavy cargo low and centered
- Recheck screws after the first few drives
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | AT1 |
| UPC | 851945005250 |
| Track length | 48 in |
| Track width | 1 5/8 in |
| Track height | .45 in |
| Material | 6063 T5 aluminum alloy |
| Finish | Anodized clear |
| Quantity | Two tracks per set |
| Hardware | Stainless steel mounting screws |
Vehicle fitment
The 48 in track is made for a DECKED short bed unit, so the bed unit matters more than the truck model.
Confirm your vehicle’s year, model and trim before ordering. Confirm your DECKED unit is a short bed model.
Installation notes
The tracks are permanently mounted, so confirm their position on the bed before fastening the included stainless steel screws.
What’s included
Two tracks and stainless steel mounting screws. Yakima or Thule racks are not included.









