Overview
The Crown Automotive 56001132 is a black front windshield wiper arm for the 1984–1996 Jeep Cherokee (XJ). It is made for either the driver or passenger side front position.
Ten XJ trims are named for these model years.
Key features
- Front position, driver or passenger side
- Black finish
- Covers the 1984–1996 Cherokee XJ across ten trims
- Crown Automotive part number 56001132 with UPC 848399021479
Matching arms to the blade
The arm and the blade work as one assembly, so a replacement arm needs to match the blade’s hook style and reach. Blade adapters differ between generations of wiper arms, and an arm that seats loosely on the blade adapter can let the blade twist during use. Before buying a new arm, remove the blade and check how it clamps onto the arm tip.
Clean the windshield edges and the cowl area while the arm is off, since grit and leaves collect there and wear the pivot seal. Lubricate the pivot lightly if it is stiff, but avoid getting grease on the glass. Once the new arm is installed, check the blade’s contact across the full stroke and confirm it clears the hood at its lowest park position.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56001132 |
| UPC | 848399021479 |
| Part type | Windshield wiper arm |
| Finish | Black |
| Position | Front, driver or passenger side |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 1984–1996 Jeep Cherokee (XJ) in Base, Chief, Laredo and Limited trims.
Cherokee years after 1996 and Wrangler models are outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One black front arm.
Not included: Wiper blades, linkage and the motor are not part of this item.









