Overview
The Crown Automotive 55176184 is a bare steel tailgate hinge for the 1987–1995 Jeep Wrangler (YJ). It is a factory replacement style hinge and must be painted before installation, so finish the steel before it goes on the vehicle.
Crown Automotive manufactures and distributes replacement parts for Jeep vehicles. The company says its catalog includes over 8,000 different part numbers, among them many factory-discontinued items, and this hinge is one of the Jeep replacement parts in that range.
Key features
- Bare steel construction
- Factory replacement style
- Painting required before use.
- Fits the 1987–1995 Jeep Wrangler YJ
- Crown Automotive part number 55176184
Preparing the bare steel hinge
A bare steel hinge is more exposed to moisture than a finished one, so surface preparation matters. Remove any mill scale or oil, then scuff the steel so the primer has something to grip. Apply a rust-inhibiting primer and a topcoat in thin layers, and let each coat cure before handling the hinge or fitting it.
Because the hinge carries the tailgate’s weight, the fasteners and pivot area deserve a check during installation. Look for smooth movement, a square fit against the body and no binding at the pivot. A hinge that sits true reduces strain on the tailgate and on the latch that closes against it.
- Degrease the steel before sanding or priming
- Check pivot movement after the coating has cured
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55176184 |
| UPC | 848399020878 |
| Material | Bare steel |
| Finish | Unpainted, painting required |
| Style | Factory replacement style |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The hinge is not covered for the TJ or JK Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hinge arrives as bare steel, paint or prime it before installation, and allow time for the coating to cure. Wear eye protection when sanding or grinding the steel surface.
















