Overview
The Crown Automotive 56001449 is a heater blower motor for Jeep CJ5 models from 1977 to 1983, CJ7 models from 1977 to 1986, the Jeep Scrambler from 1981 to 1985, and the Wrangler YJ from 1987 to 1990. It is sold as a motor only, with a motor portion that is 3 inch in diameter.
The motor is larger than OEM and needs a hole cut in the firewall, so it is not a straight drop-in replacement. Plan the firewall work before you start the swap.
Key features
- Motor only
- Motor portion has a 3 inch diameter
- Larger than the original equipment motor
- Requires cutting a hole in the firewall
Firewall work and blower clearance
A larger blower motor often means more than a new motor: the firewall opening, the seal around it and the space behind the dash all change. Before cutting, mark the opening from the cabin side and check that the motor clears the pedals, brake lines and wiring harness. Work slowly and keep the sheet metal scraps out of the heater box.
After the motor is in, reseal the opening so water and exhaust fumes stay out of the cabin. Route the wiring away from heat sources and moving parts, and check the blower resistor and switch for wear, since they carry the same current. A new motor on a worn resistor can lead to repeat failures.
- Mark the firewall opening before cutting
- Deburr the edge and protect wiring
- Reseal the opening after installation
- Check the blower resistor and switch
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56001449 |
| UPC | 848399021578 |
| Part type | Heater blower motor (motor only) |
| Motor diameter | 3 inch (motor portion) |
| Size compared with OEM | Larger than OEM |
Vehicle fitment
It fits 1977 to 1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1977 to 1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade); 1981 to 1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR); and 1987 to 1990 Jeep Wrangler (YJ) (Base, Islander, Laredo, S, Sahara, Sport).
Not covered: CJ5 and CJ7 models before 1977, and Wrangler YJ models from 1991 to 1995. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A hole must be cut in the firewall for this motor. Check clearance before cutting, and wear eye protection while cutting sheet metal. Deburr the cut edge and protect nearby wiring and hoses.
What’s included
The part is the heater blower motor only.
Not included: the blower wheel, housing and other heater components.









