Overview
The Crown Automotive 52008362 is a rear emergency brake cable for the 1997–2006 Jeep Wrangler (TJ), usable on either the driver side or the passenger side. The cable connects to the rear drum and applies the rear brake when the parking brake is pulled.
Since one part number covers both sides, a TJ owner replacing both cables would need two of this cable.
Key features
- Rear emergency brake cable
- Works on the driver or the passenger side
- Connects to the drum
- Direct fit for the 1997–2006 Wrangler (TJ)
Choosing rear cables for a TJ
A TJ uses rear parking brake cables that run from the equalizer to each rear drum. Because one part number fits either side, it is easy to order the wrong quantity. Before buying, count how many cables the vehicle needs and confirm whether both rear wheels are being replaced. Many owners change the pair together, since the cable on the other side has usually worn at a similar rate.
Cable length matters as much as the connection point. A cable that is too long will leave the parking brake slack, and one that is too short can pull the shoes out of position. Compare the new cable’s routing against the old one, paying attention to the guide clips and the bend near the drum backing plate.
After installation, adjust the parking brake so the lever travels a reasonable distance before the rear brakes engage, then test the vehicle on a slight incline. Recheck the adjustment after a few days of driving, since new cables settle as they seat in their housings.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52008362 |
| UPC | 848399014082 |
| Part type | Emergency brake cable |
| Position | Rear, driver or passenger side |
| Connects to | Rear brake drum |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for the 1997–2006 Jeep Wrangler (TJ).
Wrangler LJ models are not covered by this cable, and the YJ and JK are also outside its fit. Verify the year, model and trim of your Wrangler before you order.
