Overview
The Crown Automotive 53034095AA is an accessory drive belt, also called a serpentine belt, for the 2007-2015 Jeep Wrangler JK with a 2.8L diesel engine and air conditioning. It is 96.5 in. long with 6 ribs.
Belt length and rib count are the two measurements to match against your existing belt. Confirm the engine and air conditioning equipment before ordering.
Key features
- Accessory drive belt for the 2007-2015 Jeep JK Wrangler
- Built for the 2.8L diesel engine
- Air conditioning equipped vehicles
- 96.5 in. long
- 6 ribs
Keeping the serpentine belt in service
The serpentine belt drives the alternator, water pump, power steering pump and air conditioning compressor from one continuous path. A worn or mis-routed belt can slip, squeal or fail, and on a diesel engine the accessory load makes a dependable belt more important. Replace the belt when its surface shows cracks, glazing, missing ribs or fraying edges.
Check belt tension once a new belt is installed, and recheck after the first few drive cycles as the belt settles. Look at the tensioner and idler pulleys for wobble or noise, since a failing pulley can damage a new belt quickly. Inspect the belt at every oil change, keep oil and coolant off it, and keep fingers clear of the pulleys while the engine runs.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53034095AA |
| UPC | 849603005612 |
| Belt type | Accessory drive (serpentine) |
| Length | 96.5 in. |
| Ribs | 6 |
| Engine | 2.8L diesel |
| Equipment | Air conditioning |
Vehicle fitment
It is designed for the 2007-2015 Jeep JK Wrangler with a 2.8L diesel engine and air conditioning.
Confirm your vehicle’s year, model and trim before ordering, and check that your engine is the 2.8L diesel.
Installation notes
Confirm the 96.5 in. length and 6 ribs against the belt you are replacing, then route it around the accessory pulleys in the same path. Disconnect the battery before working on the belt drive.
What’s included
The belt only. Tensioner, pulleys and tools are not included, so check them before installing.









