Overview
The Corbeau 2-inch lap and 4-point harness belt, part number 44001B, is a black bolt-in belt designed for Corbeau seats. It pairs a 2-inch lap belt with a four-point harness, and it is designed to work with any Corbeau seat.
The belt is built with military grade nylon webbing and pressure reducing waist pads for comfort. A push button release buckle opens the harness quickly, and a double release rear buckle option gives easy access to a rear seat. Matching harness pads are offered in the same colors as the belt.
Key features
- Four-point harness design with a 2-inch lap belt
- Military grade nylon webbing
- Pressure reducing waist pads
- Push button release buckle
- Double release rear buckle option for rear seat access
- Bolt-in mounting
- Compatible with any Corbeau seat
Harness belt setup and checks
A harness belt is only as strong as its mounting points and the seat it is bolted to. Before fitting, confirm that the bolt holes are clean and threaded, that the mount plates are solid, and that the belt routes without twist. Use the hardware that suits the seat, and never swap in mismatched bolts.
Webbing should be checked regularly for cuts, fraying and stiffness, especially where it rubs against seat edges or buckles. A buckle that sticks or fails to latch needs replacing. After any hard impact, many harness owners retire the belt because the webbing and hardware may have been stressed beyond their rated limit.
- Inspect webbing for fraying
- Test the push button release
- Confirm mount plates are solid
- Replace belts after a hard impact
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 44001B |
| UPC | 70000359288 |
| Belt type | 4-point harness with 2-inch lap belt |
| Mount | Bolt-in |
| Color | Black (also available in blue and red) |
| Webbing | Military grade nylon |
| Release | Push button release buckle; double release rear buckle option |
Vehicle fitment
It is designed as universal fit rather than a factory replacement, so fit depends on the seat and mounting points you use with it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a bolt-in belt, so check that the mounting points on your seat or vehicle suit the hardware before you begin.
What’s included
One black 2-inch lap and 4-point harness belt with bolt-in mounting.
Not included: Matching harness pads in the same colors as the belt, not part of this belt.
