Overview
The Bushwacker 58507 is a Smooth Back Ultimate BedRail Cap for the 1997–2004 Dodge Dakota. It is a molded plastic cover that fits over the top edge of the truck bed to help guard that edge against dents, dings and scratches. It can also cover minor existing damage on the rail.
The caps are extra thick to absorb impact and resist warping. They are made in the U.S.A. from Dura-Flex 2000 TPO, the same material used for the Trail Armor line for Jeeps. The finish is OEM matte black with a Smooth Back textured surface, and the caps are engineered for the Dakota to fit factory-tight with smoothly finished edges.
Key features
- Smooth Back textured surface in OEM matte black
- Extra-thick Dura-Flex 2000 TPO plastic that Bushwacker says resists warping
- 100% UV protected to prevent chalking
- Attaches with 3M adhesive plus a screw-clip system, with no drilling
- Close tolerances and smoothly finished edges for a factory-tight fit
Bedrail cap care and fit
A bedrail cap takes the wear that would otherwise land on the top edge of the bed. Tie-down straps, tools set down on the rail and gear sliding in and out are the usual causes of dents and scratches there, so a cap made of impact-resistant plastic gives that edge a sacrificial layer. Because the cap sits on the outside of the rail, a snug edge also keeps water and road grit from working underneath it.
Good results depend on prep. Clean the rail and the underside of the cap with a mild cleaner and let both dry before the adhesive goes on. A cap will not straighten bent metal, so inspect the rail first and address any dents before mounting. Expect some road vibration over time, and check the clips for snugness after the first few trips.
- Wash with mild soap and water, avoiding harsh solvents on the matte finish
- Re-check the screw clips after the first few trips
- Look for lifting edges after rough or wet weather
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 58507 |
| UPC | 90689113474 |
| Style | Smooth Back |
| Finish | OEM matte black, Smooth Back textured |
| Material | Dura-Flex 2000 TPO plastic, 100% UV protected |
| Mounting | 3M adhesive and screw-clip system, no drilling |
| Fitment type | Direct fit |
| Made in | U.S.A. |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It fits the 1997–2004 Dodge Dakota in the Base, R/T, SLT, SLT Plus, SXT, Sport and Sport Plus trims.
Dakota models from 2005 onward and Dodge Ram pickups are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a no-drilling install. The caps attach with 3M adhesive and Bushwacker’s screw-clip system, so the bed rail itself is not drilled.
What’s included
The package contains the Ultimate BedRail Cap only. Compare the box contents with your installation plan before starting.









