Overview
The Bushwacker 49504 is a Diamond Back Ultimate BedRail Cap for Chevrolet or GMC pickups, a molded plastic guard for the top edge of the truck bed. Confirm fit for your year, model and bed before choosing this part number.
The cap is extra thick to absorb impact and resist warping, with 100% UV protection to prevent chalking. It is made from Dura-Flex 2000 TPO, the same plastic used for Trail Armor on Jeeps, and has a textured Diamond Back finish in OEM matte black. Its fit is factory-tight with close tolerances.
Key features
- Diamond Back textured surface in OEM matte black
- Dura-Flex 2000 TPO plastic that Bushwacker rates 100% UV protected
- Extra-thick build for impact and warping resistance.
- Smoothly finished edges with close tolerances for a factory-tight fit
- Bonds on with 3M adhesive and a screw-clip system; no holes drilled in the rail
- Made in the U.S.A. with a Limited Lifetime Warranty
Bonded cap upkeep
Bed rail caps protect the edge where tools, coolers and rope tend to scrape. Because this one is bonded rather than bolted, its life depends heavily on the adhesive staying sealed to a clean rail. Moisture and road grit that work under an edge are the usual reasons a bonded cap starts to lift, so the bond deserves periodic attention.
A TPO plastic cap handles routine washing well, but a stiff brush and strong solvents can dull the textured surface over time. Use mild soap and water, then rinse thoroughly. Inspect the edges and the screw-clip points after rough trail use, and reseat any corner that has begun to lift before dirt builds up beneath it.
- Wash with mild soap instead of harsh solvents
- Look for lifted corners after off-road trips
- Keep road grit out from under the cap edges
- Re-bond only with a clean, dry rail surface
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 49504 |
| UPC | 90689113139 |
| Product type | Ultimate BedRail Cap (bed rail protector) |
| Style | Diamond Back |
| Material | Plastic, Dura-Flex 2000 TPO |
| Finish | OEM matte black, textured |
| UV protection | 100% |
| Fitment type | Direct fit |
| Mounting | 3M adhesive and screw-clip system |
| Warranty | Limited Lifetime Warranty |
| Made in | U.S.A. |
Vehicle fitment
The 49504 is made for Chevrolet or GMC pickups. Verify your truck’s year, model and trim before you buy.
Match the bed length and model year of your Chevrolet or GMC truck before choosing this cap. Verify your truck’s year, model and trim before you buy.
Installation notes
The cap bonds with 3M adhesive and a screw-clip system, and no drilling is needed. Check the rail profile against your truck before the adhesive goes on.
What’s included
The mounting parts are 3M adhesive and a screw-clip system. Compare the parts in the box with your steps before starting.









