Overview
The BOLT Lock 7019341 is a 1/2 inch receiver lock that opens with an early model GM key. It secures the hitch pin in the receiver, so the hitch cannot be removed without the key.
The stainless steel shaft is 5/8 inch in diameter and fits class 3 and class 4 hitches. The solid zinc core and automotive grade cylinder are designed to resist picking and bumping, and the lock is made in the USA.
Key features
- Opens with early model GM keys
- Patented 6 plate-tumbler sidebar
- Stainless steel shutter against dirt and moisture
- Rugged jacket and cap
- Made in the USA
- Limited lifetime warranty
Hitch pins and lock wear
A receiver lock works by putting a hardened pin through the hitch so it cannot be pulled out of the receiver. Because the pin is what holds the hitch in place, the shaft and the cylinder carry most of the load and most of the wear. Hitch pins are often replaced along with the locks that secure them, especially when the shaft shows scratches or the bore has grown loose.
Before using a lock like this, check that the receiver opening and the shaft match. A shaft that rattles in the receiver can wear the hole over time. Keep the shutter clean, and if you tow in salt or wet conditions, rinse the lock and let it dry before storing the key.
Specifications
| Brand | BOLT Lock |
|---|---|
| Part number | 7019341 |
| UPC | 652732112430 |
| Shaft diameter | 5/8 inch, stainless steel |
| Hitch class | Class 3 and 4 |
| Core | Solid zinc |
| Warranty | Limited lifetime |
Vehicle fitment
It is a universal fit. Compatibility depends on the early model GM key and the hitch class rather than a model year.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The lock is the only item covered here. Check the parts you receive against your installation plan before starting.












