Overview
The Bestop Replace-a-Top with Clear Windows (Black), part number 51366-01, is a replacement soft top for the 1999–2002 Chevrolet Tracker in the Base, LSi, LT and ZR2 trims. It is a fabric-only top in black vinyl with clear windows, intended to replace a worn or damaged soft top.
The top uses the Belt Rail attachment system and American fabric that stretches during installation, then returns to its original shape for tautness. Factory-spec Velcro, thread, webbing and door seals are included, along with oversized zippers, DOT approved windows, and a rear attachment that lets the tailgate open without opening the rear window.
Key features
- Belt Rail attachment system, which Bestop describes as patented
- American fabric that stretches during installation and returns to its original shape
- Factory-spec Velcro, thread, webbing and door seals
- Oversized zippers and DOT approved windows
- Rear attachment that lets you open the tailgate without opening the rear window
- Black vinyl finish with clear windows
- Bestop soft top parts can be replaced individually
- Two-year limited warranty
Caring for a replacement soft top
A replacement soft top takes the weather load that the original fabric carried, so its condition affects how quiet, dry and secure the cabin feels at speed. Fabric tops work best when the bows, hooks and attachment points are sound before the new top goes on. Check the frame for loose fasteners or worn rails and fix them first, since a top stretched over a loose frame will wear faster.
Routine care is simple. Wipe the fabric with mild soap and water and let it dry fully before folding or storing it. Check seams, Velcro strips and door seals each season for lifting edges or thinning material. Small problems caught early are far easier to repair than a torn panel or a failed zipper track. Clean vinyl windows with a soft cloth and plain water, since abrasive pads leave fine scratches that cloud the view. Lubricate zipper teeth occasionally with a dry lubricant so they run smoothly.
- Inspect zipper tracks and sliders for grit
- Re-seat Velcro strips that have lifted
- Keep the top dry when stored
- Replace worn door seals before water enters
Specifications
| Brand | Bestop |
|---|---|
| Part number | 51366-01 |
| UPC | 77848070618 |
| Color | Black |
| Top material | American fabric, black vinyl |
| Window type | Clear, DOT approved |
| Doors included | Doors not included |
| Hardware | Hardware not included |
| Fitment | Direct fit |
| Warranty | Two-year limited |
Vehicle fitment
The manufacturer fitment list shows this top as a direct fit for the 1999–2002 Chevrolet Tracker in the Base, LSi, LT and ZR2 trims.
Tracker models from other years, and Chevrolet Tracker trims not named in the list, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The top requires factory original hardware, and that hardware is not included, so the factory attachment hardware on the vehicle must be in usable condition. Replacement doors are not included with this top. Stretch the fabric carefully during installation to avoid tearing the new top.
What’s included
The Replace-a-Top consists of fabric only, with factory-spec Velcro, thread, webbing and door seals.
Not included: Factory original hardware and doors.









