Overview
The Bestop Traditional Bikini in Black, part number 52540-01, is a color matched fabric cover for the driver’s compartment. It fastens with two snaps to the stock windshield retainer and uses long straps that attach at the back of the vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
The bikini measures 61 inches long by 49 inches wide and connects to the footman loops at the rear of the vehicle. Bestop says all mounting hardware is included with the top.
Key features
- Uses the stock windshield retainer
- Two snaps, one on each side of the retainer
- Long straps attach at the rear of the vehicle
- Connects to the footman loops at the rear
- Color matched fabric
- Covers the driver’s compartment only
Before you install
A bikini cover mainly keeps rain, sun and road debris off the front seats while the top is off. Because it is fabric, the look and fit depend on how tightly the straps and snaps are set. Snug, even tension stops the cover from flapping at highway speed and reduces wear on the snaps and stitching.
Before fitting, inspect the windshield retainer and the rear footman loops for cracks, bends and loose mounts. These points carry the load of the cover, so repair any damage first. Fabric that rubs against metal edges can fray over time, so route the straps clear of sharp corners.
Off-road use puts extra strain on any soft top accessory. Expect the straps and snaps to loosen after the first few rough trips and retighten them then. Store the cover dry and folded loosely to prevent creases and mildew.
- Check snaps for wear after rough trails
- Keep straps free of sharp edges
- Dry the fabric fully before folding
Specifications
| Brand | Bestop |
|---|---|
| Part number | 52540-01 |
| Color | Black, color matched |
| Dimensions | 61 inches long by 49 inches wide |
| Coverage | Driver’s compartment only |
| Mounting | Stock windshield retainer, rear straps, two snaps |
| Required installation | PN[51209] |
Vehicle fitment
Fit depends on the stock windshield retainer and the rear footman loops being present. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The top depends on the stock windshield retainer and the rear footman loops, so check that both are present before fitting. The top requires installation of PN[51209], which is not included.
What’s included
Bikini top with long straps, two snaps and all mounting hardware.
Not included: PN[51209], which the top requires for installation.









