Overview
The BedRug BRQ15SBK is a complete custom-fit truck bed liner with a 3/4 in. thick floor and 1/4 in. thick side walls, including bulkhead and tailgate sections. It is made for truck owners who want a textured, anti-skid bed surface. Confirm the bed size matches your truck before ordering.
The liner is an alternative to spray-in bedliners and protects the bed finish without damage. It installs without drilling, sanding or prepping the bed, takes one person under 30 minutes, and uses hook and loop fasteners across its five-piece design. The textured surface is UV resistant, and the thick foam and fiber backing help prevent dents and scratches.
Key features
- Five-piece design that installs with hook and loop fasteners
- Textured anti-skid surface that is UV resistant
- Cushioned, knee friendly surface that absorbs impact
- Resists bleach, battery acid, oil and gas, which wash right off
- Custom fit for each truck, with a smooth, flat surface that keeps the bed’s original shape
- Full access to factory tie-downs
- No drilling, sanding or prep work required
- Limited lifetime warranty
Preparing for installation day
Start by clearing the bed of loose gear and sweeping out grit, since anything left under the liner can press into the floor. Lay the five pieces out in the bed first and match each edge to its position, including the bulkhead and tailgate sections. A quick dry fit shows whether the sections sit flat before the hook and loop strips are pressed down. Take a few minutes to check that all five pieces are present.
Once it is in place, walk the edges and corners and press any lifted strip firmly back into position. Keep an eye on the tie-down points so the liner does not block them, and make sure the tailgate section closes without catching. Re-check the fit after the first few loads, since shifting cargo can move the pieces slightly. Good preparation makes the install quicker and keeps the liner seated for longer.
Specifications
| Brand | BedRug |
|---|---|
| Part number | BRQ15SBK |
| UPC | 870558003422 |
| Material | 100% polypropylene |
| Floor thickness | 3/4 in. |
| Side wall thickness | 1/4 in. |
| Pieces | Five-piece design |
| Installation | Hook and loop fasteners |
| Surface | Textured, anti-skid, UV resistant |
| Warranty | Limited lifetime |
The feature list gives the material as 100% polypropylene, while BedRug’s description refers to a 1/4 in. TPO composite bonded to closed-cell foam. Confirm the material with BedRug before ordering.
Vehicle fitment
Custom fit for each truck, sized to a specific bed rather than universal. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation uses hook and loop fasteners and needs no drilling, sanding or prepping. One person can complete it in under 30 minutes. Because the liner comes as five pieces, check that every piece is present before starting.
What’s included
The liner includes bulkhead and tailgate sections in a five-piece design.







